Highwood AD-LNGPS61-ACE Installation guide

Type
Installation guide

This manual is also suitable for

For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Pool & Spa Collection
Laguna Chaise Lounge
Assembly Guide
1) Place (4) "D" Flanged Washers
into Both Sides of Holes in Back
Support as Shown.
AD-LNGPS61
01.02.19
A
2) With Seat Assembly Facing
Downward, Attach Back
Support Using (2) "B" Bolts
as Shown.
x16
B
C
D
1/4"-20 X 1-1/4"
1/4"-20 X 2"
1/4"-20 X 3"
Flanged Washer
x2
x8
x4
D
D
BACK SUPPORT
B
BACK SUPPORT
SEAT ASSEMBLY
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Pool & Spa Collection
Laguna Chaise Lounge
Assembly Guide
AD-LNGPS61
01.02.19
C
C
3) Attach Right & Left Leg Assemblies
to Seat Assembly Using (8) "C" Bolts
as Shown.
LEFT LEG ASSEMBLY
SEAT ASSEMBLY
RIGHT LEG ASSEMBLY
4) Attach Mid Leg Support to Left Leg
Assembly Using (4) "A" Bolts.
5) Attach Each End Leg Support to
Left Leg Assembly Using (2) "A" Bolts.
6) Repeat Steps 4 & 5 for Right Leg
Assembly & Tighten All Bolts.
7) With Help From Another Person, Rotate
Lounge Into the Upright Position.
A
A
A
LEFT LEG ASSEMBLY
END LEG SUPPORT
END LEG SUPPORT
MID LEG SUPPORT
RIGHT LEG ASSEMBLY
  • Page 1 1
  • Page 2 2

Highwood AD-LNGPS61-ACE Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI