2. Highwood
  3. AD-CHGC1-WHE
AD-CHGC1-WHE

Highwood AD-CHGC1-WHE Operating instructions

  • I've reviewed the provided assembly guide for the Adirondack Collection Classic Garden Chair. It details step-by-step instructions for assembling the chair, including how to attach the back, seat, and arms, along with a hardware list and required tool. I'm ready to answer any questions you have about the assembly process.
  • How should I tighten the bolts during assembly?
    What tool is required for assembly?
1
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 1
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
highwood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Classic Garden Chair
Assembly Guide
1) Attach Chair Back
to Seat using (1) "A"
Bolt in the Upper Hole
on Each Side
AD-CHGC1
01.15.20
A
2) Attach Arm Assembly
to Seat using (2) "A" Bolts
in Front and (1) "B" Bolt in
Rear. Attach Arm to Back
using (1) "A" Bolt.
x8
3) Repeat on Other Side.
ALIGN ANGLES OF
BACK AND SEAT
BACK
SEAT
A
A
ARM ASSEMBLY
BACK
SEAT
A
B
A
1/4"-20 X 2"
B
1/4"-20 X 3"
x2
/