2. Highwood
  3. Easy-Add Cup Holder

Highwood Easy-Add Cup Holder Assembly Instructions

  • Hello! I'm here to assist you with your Adirondack Collection Easy-add Cup Holder. I've reviewed the provided assembly guide, which details the steps to attach the cup holder to your chair using the included screws and Torx bit. The cup holder is designed for easy mounting on either arm of the chair. Feel free to ask any questions you have about the assembly process or the product itself.
  • How many screws are required to attach the cup holder?
    What size are the screws?
    Can the cup holder be installed on either arm of the chair?
A
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com. PAGE 1 OF 1
INCLUDED TOOLS
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
T-15 TORX BIT
highwood
NATURE'S CLOSEST RIVAL
CUSTOMER-SUPPLIED TOOLS
Cordless screwdriver/drill OR
Multi-bit handle for the Torx bit.
Adirondack Collection
Easy-add Cup Holder
Assembly Guide
1) With chair turned over, attach
Cup Holder to arm with two A screws.
AD-CUPH1
08.24.2016
Ax2
#7 x 1-1/4"
A
(Cup Holder can be installed on either arm)
/