Prepare 2 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#B). Align chair
seat (#2) to the holes of the chair back (#1). Secure two center holes of chair seat (#2) by using bolts (#B),
but do not fully tighten.
Prepare 2 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#A). Secure corner
holes of the chair seat (#2) to chair back (#1) by using bolts (#A). Do not fully tighten bolts (#A).
Prepare 2 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#B). Align arms
(#3L/R) to the holes of the seat (#2), then secure by using bolts (#B). Do not fully tighten bolts (#B).
Prepare 2 bolts assembly by inserting lock washer (#C), then flat washer (#D) onto bolts (#B). Align arms (#3R/
L) to the holes of the chair back (#1). Secure by using bolts (#B). Fully tighten ALL bolts from the previous steps.
Place cushion (#4) onto seat.
Place back cushion (#5) to chair back.
/
