MiniGadgets HDLiveCam User guide

  • Hello! I have reviewed the user manual for the camera. This document provides instructions on how to connect the camera to your Android device, using the HDLiveCam app, and how to configure Wi-Fi settings for remote viewing. I'm ready to answer your questions about setting up and using your camera.
  • What app do I need to download?
    How do I connect to the camera's Wi-Fi?
    What should I do if the app does not automatically detect the camera?
Quick Start Guide - Android Devices
1. Download the “HDLiveCam” app.
Scan the QR code to the left,
or visit www.minigadgets.com/hdlcdroid
on your android device.
• Before proceeding, open the app, make an account, and log in
2. After creating an account and logging into the app: Power on your
device, then connect to the device’s Wi-Fi signal on your phone. Go
to your phone’s Settings > Connections > Wi-Fi and select the CARE-
AP signal to join (the below is an example of that signal)
3. Once connected, open the HDLiveCam app. It will automatically
detect that you are connected and ask: “The hotspot of the camera is
currently connected. Whether to watch the camera through a direct
connection.” Choose ‘OK”.
If this does not happen, please go to your phones Settings > Connections
> Wi-Fi > Advanced and turn off ‘Switch to mobile data’, and then try
again.
4. Select the bottom button that reads ‘Set up camera Wi-Fi’
5. Select the Wi-Fi network to pair the device to and input the
password for the chosen Wi-Fi network. Then press ‘Connect’.
6.Confirm the wi-fi network and password you chose with ‘OK’.
7. A progress bar will appear and say ‘One moment please’. Once it
reaches 100% the app will ask you to name the Camera (ex: living
room, kitchen, den, etc.)
8. Your camera is now added to your router and available for remote
viewing. Tap on the picture displayed to enter the livestream.
• If your network is still not listed, move closer to the router.
• If the camera fails to connect, please retry and try moving the device
closer to the router it is being paired to.
Scan for instructional videos
/