2. Hoymiles
  3. HRSD-2C

Hoymiles HRSD-2C Installation guide

  • Hello! I'm a chat assistant, and I've reviewed the HRSD-2C Quick Installation Guide. I can assist with your questions about its installation, wiring, and safety procedures outlined in the document. The guide details mounting methods, wiring steps, and important precautions to ensure proper functionality and safety.
  • What is the minimum space required for ventilation?
    What is the correct order for connecting the cables?
    What is the correct order for disconnecting the cables?
HRSD-2C Quick Installation Guide
1. Appearance
2. Installation
© 2022 Hoymiles Power Electronics Inc. All rights reserved.
Mounting Brackets
56
1 2 3 4
3Input2 +
4Input2 -
1Input1 +
2Input1 -
6Output -
5Output +
A. Method 1 (Recommended) B. Method 2
Note:
·Allow a minimum of 1.5 cm of space between the roof and the HRSD-2C enclosure to ensure ventilation and heat dissipation.
Region: Global AP040557 REV1.1
3. Wiring
·Connect the outputs of HRSD in series.
© 2021 Hoymiles Power Electronics Inc. All rights reserved.
HRSD-2C Quick Installation Guide
Note:
·When installing HRSD-2C, connect the input cables to the PV module before connecting the HRSD-2C output cables in series.
·If disconnecting HRSD-2C, disconnect the HRSD-2C output cables from the string before disconnecting the input cables from the PV module.
·If connecting HRSD-2C to a single PV module, first connect PV module to Input 1, then connect Input 2 cables together.
·Connectors from different manufacturers cannot be mated with each other.
·Transmitter must be powered off during HRSD-2C installation.
·HRSD-2C output Voltage is 0.9V to 1.1V when Transmitter "permission to operate" signal is not present.
3
1
2
+-
+-
+ + - -
+ + - -
Region: Global AP040557 REV1.1
·Connect modules to HRSD inputs.
/