Installation Instructions for
Vetra Grande Pendant
980VETRAGS
Suspension
1.0
LF969
Assemble the Fixture
Screw the new lamp into the socket.
SOCKET
LAMP
1
1A
1
Place the hardware inside the glass shade and install the
three mounting rods by screwing them in completely.
2
1B
2
MOUNTING ROD
MOUNTING ROD
GLASS
SHADE
C AUTION: Due to the fixture’s weight,
assistance will be needed for installation.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. LED version may be dimmed with a LED dimmer. Consult
lamp manufacturer for additional information.
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
C AUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
2
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2017 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
2A
Replacing the Lamp
Reach inside the glass shade and unscrew the old
lamp, then screw in the new lamp into the socket.
1
C AUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
GLASS SHADE
SOCKET
LAMP
/
