1
Installation Instructions for
Showtime Wall
980SHOWTMW
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
1
1.0
Wall
1A
JW632_2D
ELECTRICAL BOX
#8-32 SCREW
1
1
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
2
3
4
1B
2
3
4
GENERAL PRODUCT INFORMATION:
This product can mount to either a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
2
Properly place all wires and wire nut connections in the
electrical box.
Mount the fixture onto the mounting plate and secure it
tightly with the two knurled nuts.
1C
5
6
Install Lamp and Shade
2A
1
Screw the lamp into the socket.
KNURLED NUT KNURLED NUT
1D
Install the top shade by aligning it to holes on top of
the fixture and securing it with the two knurled thumb
screws.
TOP VIEW
THUMB SCREW TOP SHADE
TOP SHADE
THUMB SCREW
7
SOCKET
LAMP
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Use Type BT15
medium base lamp.
MAX 75 Watt
3
2B
2
Gently slide the glass shade down until it rests inside the
groove in the frame.
GLASS
SHADE
GROOVE
GROOVE
GLASS
SHADE
NOTE: To re-lamp, reverse the section 2 instructions
to remove the diffuser and gain access to the lamp
and socket.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2012 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4
/
