Generation Lighting HD475SC12LEDMPT Installation guide

Brand
Generation Lighting
Model
HD475SC12LEDMPT
Type
Installation guide

This manual is also suitable for

1
Installation Instructions for
Vent Head
1.1
HD475_50FSJ
980FSJVENTH
GP I :ENERAL RODUCT NFORMATION
This product is suitable for indoor dry locations only.
Install the Lamp
LAMP
Use Watt MR16 Front CoverMAX 50
Halogen Lamp
Align the lamp pins with the socket holes.
Push the lamp pins completely into the socket holes.
NOTE: Use only your fingers and a soft cloth to install
the lamp.
SOCKET
Remove the Tail (Optional)
TAIL
The tail can be removed for a different aesthetic.
Simply unscrew the tail by hand to remove it.
Fusion Jack™
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1A
2
2A
1
1
2
1
2
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2

Generation Lighting HD475SC12LEDMPT Installation guide

Brand
Generation Lighting
Model
HD475SC12LEDMPT
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents