Installation Instructions for
Suspension
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
Incandescent version may be dimmed with a standard incandescent
dimmer. LED version may be dimmed with a LED dimmer. Consult
lamp manufacturer for additional information.
1
Lifo Pendant
980LIFOP
1.0
LP956
Assemble the Pendant
1
1A
Screw the lamp into the socket.
C AUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
LAMP
SOCKET
1B
CORD
SHADE
SOCKET
2
Feed the cord through the shade and lower the shade
until it rests properly on the socket assembly.
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2017 Lighting.All rights reserved.The " Lighting" graphic is aLBL LBL
registered trademark of Lighting. Lighting reserves the right toLBL LBL
change specifications for product improvements without notification.
A Generation Brands Company
2
/
