Tyan S5535 Quick Reference Manual

http://www.tyan.com

1

S5535/S5535-HE

Version 1.0a

Copyright

this manual may be reproduced or translated without prior written consent from

MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

Nuvoton

®

is a trademark of Nuvoton Technology Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN

®

products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

http://www.tyan.com

3

Contents

Before you begin….................................................................................... 4

Chapter 1: Instruction ................................................................................ 5

1.1 Congratulations .................................................................................5

1.2 Hardware Specifications .................................................................. 5

1.3 Software Specifications ..................................................................... 8

Chapter 2: Board Installation..................................................................... 9

2.1 Board Image .................................................................................... 10

2.2 Block Diagram ................................................................................. 11

2.3 Mainboard Mechanical Drawing ...................................................... 12

2.4 Board Parts, Jumpers and Connectors ...........................................13

2.4 Installing the Processor and Heat sink............................................23

2.5 Thermal Interface Material ..............................................................29

2.6 Tips on Installing Motherboard in Chassis ...................................... 30

2.7 Installing the Memory ...................................................................... 32

2.8 Attaching Drive Cables ....................................................................36

2.9 Installing Add-In Cards .................................................................... 37

2.10 Connecting External Devices ........................................................ 38

2.11 Installing the Power Supply ........................................................... 39

2.12 Finishing Up................................................................................... 40

Chapter 3: BIOS Setup .............................................................................41

3.1 About the BIOS................................................................................ 41

3.2 Main Menu....................................................................................... 43

3.3 Advanced Menu............................................................................... 44

3.4 Chipset Menu ..................................................................................69

3.5 Boot ................................................................................................. 74

3.6 Security............................................................................................ 78

3.7 Save & Exit ...................................................................................... 79

Chapter 4: Diagnostics............................................................................. 81

4.1 Flash Utility ......................................................................................81

4.2 AMIBIOS Post Code (Aptio) ............................................................ 82

Appendix: Fan and Temp Sensors..........................................................89

Glossary..................................................................................................... 93

Technical Support ....................................................................................99

http://www.tyan.com

4

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1 x S5535 Motherboard

5 x SATA Cable

1 x USB 3.0 Bracket

1 x Rear IO Shield

1 x S5535 Quick reference guide

1 x TYAN

®

Driver’s and Utilities DVD

IMPORTANT NOTE:

Sales sample may not come with the accessory listed above.

Please contact your sales representative to help order accessory for your

evaluation.

http://www.tyan.com

5

Chapter 1: Instruction

1.1 Congratulations

You have purchased the powerful TYAN

®

S5535 motherboard, based on the

Intel

®

Q87 and Nuvoton NCT6683D-T chipsets. The S5535 is designed to

support single Intel

®

Core i3/i5/i7 series processor, and up to 32GB of un-buffered

ECC 1066/1333/1600MHz DDR3 memory. Leveraging advanced technology

from Intel

®

, the S5535 is capable of offering scalable 32 and 64-bit computing,

high-bandwidth memory design, and lightning-fast PCI-E bus implementation.

The S5535 not only empowers you in today’s demanding IT environment but also

offers a smooth path for future application upgradeability. All of these rich feature

sets provides the S5535 with the power and flexibility to meet demanding

requirements for today’s IT environments.

Remember to visit the TYAN

®

website at http://www.tyan.com. There you can

find all the information on all TYAN

®

products as well as all the supporting

documentation, FAQs, Drivers and BIOS upgrades.

1.2 Hardware Specifications

TYAN S5535 (S5535AG2NR)

Supported CPU Series

Intel Core i3/ i5/ i7 (22nm/Haswell) series

processors

Socket Type / Q'ty LGA 1150/ (1)

Processor

Thermal Design Power

(TDP) wattage

Max up to 95W

PCH Intel Q87

Chipset

Super I/O NCT6683D-T

Supported DIMM Qty (4) DIMM slots

DIMM Type / Speed Unbuffered Non-ECC DDR3 1600/1333/1066

Capacity Up to 32GB

Memory

Memory channel 2 Channels

Expansion

Slots

PCI-E

(1) PCI-E Gen.2 x1 slot / (1) PCI-E Gen.2 x8 slots

(w/ x4 link) / (1) PCI-E Gen.3 x16 slot

Port Q'ty (2) GbE ports

Controller Intel I210

LAN

PHY Intel I217

Connector (5) SATA

Controller Intel Q87

Storage SATA

Speed 6.0 Gb/s

http://www.tyan.com

6

RAID RAID 0/1/10/5 (Intel RST)

Connector type DVI-I / Display port 1.2a

Graphic

Chipset Intel Processor Graphics(pGFX)

Audio Chipset Realtek ALC892-GR

USB

(6) USB3.0 ports (4 at rear, 2 via cable)+(7)

USB2.0 ports (2 at rear, 4 via cable, Type-A)

COM (1) header

Display port (DP) (2) Display port 1.2a

DVI (1) DVI-I connector

Audio (1) 5 holes Audio Jack+SPDIF fiber connector

Input /Output

RJ-45 (2) GbE ports

Chipset NCT6683D-T

Fan Total (3) 4-pin headers

Temperature Monitors temperature for CPU & memory

LED

Over temperature warning indicator / Fan & PSU

fail LED indicator

System

Monitoring

Others Watchdog timer support

Brand / ROM size AMI / 16MB

BIOS

Feature

User-configurable H/W monitoring / SMBIOS

2.7/PnP/Wake on LAN / ACPI 3.0/ACPI sleeping

states S3,S4,S5 / PXE boot support

Form Factor Micro ATX

Physical

Dimension

Board Dimension 9.6"x9.6" (243.8x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S5535 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

SATA (5) SATA signal cables

Package

Contains

Cable

USB (1) CCBL-035J, 2-port USB bracket cable

TYAN S5535 (S5535AG2NR-HE) (BTO)

Processor

Supported CPU Series

Intel Xeon E3-1200 v3, i3 (22nm/Haswell) series

processors

http://www.tyan.com

7

Socket Type / Q'ty LGA 1150/ (1)

Thermal Design Power

(TDP) wattage

Max up to 95W

PCH Intel C226

Chipset

Super I/O NCT6683D-T

Supported DIMM Qty (4) DIMM slots

DIMM Type / Speed Unbuffered ECC DDR3 1600/1333/1066

Capacity Up to 32GB

Memory

Memory channel 2 Channels

Expansion

Slots

PCI-E

(1) PCI-E Gen.2 x1 slot / (1) PCI-E Gen.2 x8 slots

(w/ x4 link) / (1) PCI-E Gen.3 x16 slot

Port Q'ty (2) GbE ports

Controller Intel I210

LAN

PHY Intel I217

Connector (5) SATA

Controller Intel C226

Speed 6.0 Gb/s

Storage SATA

RAID RAID 0/1/10/5 (Intel RST)

Connector type DVI-I / Display port 1.2a

Graphic

Chipset Intel Processor Graphics(pGFX)

Audio Chipset Realtek ALC892-GR

USB

(6) USB3.0 ports (4 at rear, 2 via cable)+(7)

USB2.0 ports (2 at rear, 4 via cable, Type-A)

COM (1) header

Display port (DP) (2) Display port 1.2a

DVI (1) DVI-I connector

Audio (1) 5 holes Audio Jack+SPDIF fiber connector

Input /Output

RJ-45 (2) GbE ports

Chipset NCT6683D-T

Fan Total (3) 4-pin headers

Temperature Monitors temperature for CPU & memory

LED

Over temperature warning indicator / Fan & PSU

fail LED indicator

System

Monitoring

Others Watchdog timer support

Brand / ROM size AMI / 16MB

BIOS

Feature

User-configurable H/W monitoring / SMBIOS

2.7/PnP/Wake on LAN / ACPI 3.0/ACPI sleeping

states S3,S4,S5 / PXE boot support

Form Factor Micro ATX

Physical

Dimension

Board Dimension 9.6"x9.6" (243.8x243.8mm)

Operating

System

OS supported list Please refer to our Intel OS supported list.

Regulation

FCC (DoC) Class A

http://www.tyan.com

8

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Compliant Yes

Motherboard (1) S5535 Motherboard

Manual (1) Quick Installation Guide

Installation CD (1) TYAN installation CD

SATA (5) SATA signal cables

Package

Contains

Cable

USB (1) CCBL-035J, 2-port USB bracket cable

1.3 Software Specifications

For OS (operation system) support, please check with TYAN

®

support for latest

information.

http://www.tyan.com

9

Chapter 2: Board Installation

You are now ready to install your motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, MiTAC recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE: Do not apply power to the board if it has been damaged.

http://www.tyan.com

10

2.1 Board Image

S5535

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com

11

2.2 Block Diagram

S5535 Block Diagram

http://www.tyan.com

12

2.3 Mainboard Mechanical Drawing

http://www.tyan.com

13

2.4 Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram. But

for the DIMM number please refer to the above placement for memory installation.

For the latest board revision, please visit our web site at http://www.tyan.com

.

http://www.tyan.com

14

Jumpers & Connectors

Connector/Jumper

1 LAN1 +USB2.0 (J42)

16 SATA 6G Connector

(SATA_6G_3)

2 DP1 Connector (J10)

17 SATA 6G Connector

(SATA_6G_2)

3 DVI-I Connector (DVI-I)

18 SATA 6G Connector

(SATA_6G_0)

4 USB3.0/DP2 (J 12) 19 Intruder Header (INTRD1)

5 LAN2 + USB3.0 (J9) 20 FP Header (J15)

6 Audio Ports (J19) 21 BAT Socket (XBT1)

7 Front Audio Header (FP_AUDIO_1) 22 USB3.0 Header (J24)

8 Rear FAN (J17) 23 Speaker Header (J83)

9 TYAN Module Header (DBG_HD1)

24 24-pin Power Connector

(ATX24P_1)

10 Front USB2.0 Header

(FP_USB_3)

25 COM Port Header (J77)

11 USB Type-A Connector (J27) 26 Front FAN (J20)

12 Front USB2.0 Header

(FP_USB_2)

27 CPU FAN (J16)

13 SATA DOM Power Header (J81) 28 PSMI Connector (J31)

14 SATA 6G Connector

(SATA_6G_5)

29 ATX 4-pin Power Connector (J18)

15 SATA 6G Connector

(SATA_6G_1)

Jumpers Slots

a Clear CMOS Header (J4) A PCIE x16 Slot (x16 link)

b ME Header (J2) B PCIE x1 Slot (x1 link)

c Security Header (J1) C PCIE x8 Slot (x4 link)

D DIMM0 (A1)

E DIMM1 (A0)

F DIMM2 (B1)

G DIMM3 (B0)

Jumper Legend

OPEN - Jumper OFF

Without jumper cover

CLOSED - Jumper ON

With jumper cover

http://www.tyan.com

15

J15

J16

J20

J77

J17

J83

FP AUDIO 1

http://www.tyan.com

16

J77: COM Port Header

Signal Pin Pin Signal

DCD 1 2 DSR

RXD 3 4 RTS

TXD 5 6 CTS

DTR 7 8 RI

GND 9 10 KEY-Pin

J16 (CPU FAN) / J20 (Front FAN) / J17 (Rear FAN): 4-pin FAN Connector

Pin 1 2 3 4

Signal GND VCC TACHOMETER PWM

Use this header to connect the cooling fan to your motherboard to

keep the system stable and reliable.

J15: Front Panel Header

Signal Pin Pin Signal

HD LED+ 1 2 PLED+

HD LED- 3 4 PLED-

RST SW- 5 6 PWR SW+

RST SW+ 7 8 PWR SW-

VCC 9 10

J83: Speaker Header

Pin 1 2 3 4

Signal 5VSB FLOATING SPKR_BUZZ_IN SPKR_BUZZ

FP_AUDIO_1: Front Audio Header

Signal Pin Pin Signal

FP_MIC_L 1 2 AGND

FP_MIC_R 3 4 AUDIO_Detect

AUO_HPOUT_R 5 6 AUO_SENSE_MIC

FIO_SENSE 5 6 NC

AUO_HPOUT_L 7 8 AUO_SENSE_HP

http://www.tyan.com

17

SAT

A

_6G_5

J81

J1

SAT

A

_6G_1

SAT

A

_6G_3

SAT

A

_6G_2

SAT

A

_6G_0

INTRD1FP USB 2

FP USB 3

J24

http://www.tyan.com

18

J81: SATA DOM Header

Signal Pin Pin Signal

VCC 1 2 GND

INTRD1: Intruder Header

Signal Pin Pin Signal

GND 1 2 INTRUDER

FP_USB_2/FP_USB_3: Front USB2.0 Header (blue)

Signal Pin Pin Signal

VCC 1 2 VCC

USB_DN0 3 4 USB_DN1

USB_DP0 5 6 USB_DP1

GND 7 8 GND

KEY 9 10 NA

SATA_6G_0 / SATA_6G_1 / SATA_6G_2 / SATA_6G_3 / SATA_6G_5: SATA 6G

Connector

PIN Define Pin

1 GND

2 SATA TX DP

3 SATA TX DN

4 GND

5 SATA RX DN

6 SATA RX DP

7 GND

Connects to the Serial

ATA ready drives via

the Serial ATA cable.

NOTE: SATA_6G_5

supports SATA DOM

Device.

J24: USB3.0 Header

Signal Pin Pin Signal

1 VCCUSB3_FRONT

VCCUSB3_FRONT 19 2 USB30RX_ON_R

USB30TX_1N_R 18 3 USB30RX_OP_R

USB30RX_1P_R 17 4 GND

GND 16 5 USB30TX_ON_R

USB30TX_1N_R 15 6 USB30TX_OP_R

USB30TX_1P_R 14 7 GND

GND 13 8 USB_PCH DN0_R

USB_PCH_DN1_R 12 9 USB_PCH DP0_R

USB_PCH_DP1_R 11 10 USB_PCH_ OC01_N

http://www.tyan.com

19

J31

J27

J4

DBG HD1

http://www.tyan.com

20

DBG_HD1: TYAN Module Header

Signal Pin Pin Signal

VCC3 1 2 LPC_LFRAME_N

LAD0 3 4 KEY

LAD1 5 6 LPC_RST_N

LAD2 7 8 GND

LAD3 9 10 33M_CLK

SERIRQ 11 12 GND

PRESENT_N 13 14 3V3_VSB

GPIO1 15 16 GPIO2

J27: Vertical Type-A USB Connector

Signal Pin Pin Signal

VCC 1 2 USB_DN

USB_DP 3 4 GND

J31: PSMI Connector

Pin 1 2 3 4 5

Signal PSMI_SCL PSMI_SDA RSVD GND VCC

J4: Clear CMOS Jumper

3

1

Normal (Default)

1

3

Clear CMOS

You can reset the CMOS settings by using this jumper. This can be

useful if you have forgotten your system/setup password, or need to

clear the system BIOS setting.

1. Power off system and disconnect power connectors from the

motherboard.

2. Remove the jumper from Pin_2 and Pin_3 (Default setting).

3. Move the jumper cap to close Pin_1 and Pin_2 for several seconds

to Clear CMOS.

4. Put jumper cap back to Pin_2 and Pin_3 (Default setting).

5. Reconnect power connectors to the motherboard and power on

system.

Page is loading ...

Tyan S5535 Quick Reference Manual

This manual is also suitable for

Tyan S5535 Quick Reference Manual

Related papers

Other documents