2. Fisher & Paykel
  3. CG905DLPX1
CG905DLPX1

Fisher & Paykel CG905DLPX1 User guide

  • Hello! I've reviewed the data sheet for the Fisher&Paykel Cooktop CG905DX1. This document contains detailed measurements, clearance requirements, and cutout specifications for the 900mm gas cooktop model. I am ready to assist you with any questions you have about the installation or specifications provided in the document.
  • What is the minimum clearance from the left edge of the cutout to the nearest vertical surface?
    What is the minimum clearance below the top of the benchtop to a combustible surface?
    What are the overall cutout dimensions?
900MM GAS ON STEEL COOKTOP
Model no:
CG905DX1
NB. Supplied for NG with an LPG conversion kit included.
Dimensions
mm
A Height of chassis (below top of benchtop)
59
B Overall width of cooktop
900
c Overall depth of cooktop
50
D Height from counter datum to top of cooktop surface
6
E Depth of front control panel
85
F Depth of cooktop cooking area
442
G Width of chassis
856
H Depth of chassis
486
I Distance from top of counter to centre of gas inlet on
product
0
Minimum Clearances
mm
Minimum clearance from left edge of cutout to nearest vertical
surface
10
Minimum clearance from right edge of cutout to nearest vertical
surface
115
Minimum clearance from rear edge of cutout to nearest
combustible surface
160
Minimum clearance from rear edge of cutout to nearest non-
combustible surface
45
Minimum clearance below top of benchtop to combustible
surface
70
Minimum clearance below top of benchtop to Fisher & Paykel
oven or nearest non-combustible surface
65
Minimum clearance from cooktop surface to downwards-facing
tiled or fire resistant surface
500
Minimum clearance from cooktop surface to rangehood or
downward facing combustible surface
650
Minimum clearance from cooktop surface to any other overhead
exhaust fan
800
Cutout Dimensions
mm
Overall width of cutout*
865
Overall depth of cutout*
490
* Note cutout position is centred to the cooktop width but offset to the
cooktop depth. Cutout front depth is 9mm from the front edge of the product.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 29.07.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATA SHEET
DATUM :
TOP OF BENCHTOP
900
B
G
530
C
F
E
D
A
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
H
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : FIRE RESISTANT SURFACE
CLEARANCE : RANGEHOOD or COMBUSTIBLE SURFACE
CLEARANCE : OTHER OVERHEAD EXHAUST FAN
I
PROFILE VIEW
/