DATA SHEET
600mm Front Control Ceramic Cooktop
DATUM :
TOP OF BENCHTOP
a
e
b
g
j j k l
c d
h
i
CLEARANCE : COMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
f
PROFILE VIEW
CLEARANCE : THERMAL PROTECTION BARRIER
CLEARANCE : RANGEHOOD
600
530
CLEARANCE : OVERHEAD CABINET NOT DIRECTLY ABOVE COOKTOP
millimetres
0 100 200 400
Model no:
CE604CBX2
Dimensions
a Overall width of cooktop
B Overall depth of cooktop
c Height of chassis (below top of benchtop)
d Height of chassis including terminal block (below top of
benchtop)
e Width of chassis
f Depth of chassis
g Height from counter datum to top of cooktop surface
h Distance from front of cooktop to cutout
i Distance from rear of cooktop to cutout
j Distance from side of cooktop to chassis
k Distance from front of cooktop to chassis
l Distance from rear of cooktop to chassis
Minimum Clearances
Minimum clearance from left edge of cutout to nearest
combustible surface
Minimum clearance from right edge of cutout to nearest
combustible surface
Minimum clearance from rear edge of cutout to nearest
combustible surface
Minimum clearance from glass surface
Minimum clearance from benchtop to overhead cabinet not
directly above cooktop
Minimum clearance below top of benchtop to thermal
protection barrier
Cutout Dimensions
Overall width of cutout*
Overall depth of cutout**
* Note cutout position is centred to the cooktop width.
** Note cutout is offset 8mm towards the front of the cooktop
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 01.06.2017
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com