2. Fisher and Paykel
  3. CI302CTB1

Fisher and Paykel CI302CTB1 User guide

  • Hello! I have reviewed the datasheet for the Fisher & Paykel Induction Cooktop CI302CTB1. This document outlines the product's dimensions and clearance requirements, which are essential for proper installation. I understand the importance of precise measurements and am ready to assist with any questions you have regarding the specifications and installation process.
  • What is the minimum clearance from the rear edge of the cutout to the nearest combustible surface?
    What is the minimum clearance from the cooktop surface to a rangehood?
    What are the overall cutout dimensions?
300MM INDUCTION COOKTOP
Model no: CI302CTB1
Product Dimensions
mm
A Height of chassis (below top of benchtop)
54
B Overall width of cooktop
00
c Overall depth of cooktop
50
d Height from benchtop datum to top of cooktop surface
5
e Width of chassis
255
f Depth of chassis
497
g Distance from front of cooktop to front of chassis
16
h Distance from back of cooktop to back of chassis
16
i Distance from side of cooktop to side of chassis
22.5
Minimum Clearances
mm
Minimum clearance from rear edge of cutout to nearest
combustible surface
0
Minimum clearance from side edges of cutout to nearest
combustible surface
0
Minimum clearance below top of benchtop to Fisher & Paykel
oven* or cabinetry thermal protection barrier
72
Minimum clearance from cooktop surface to rangehood
650
Minimum clearance from benchtop to adjacent overhead
cabinet
450
* Note the oven installed below the cooktop MUST have a
cooling fan.
Cutout Dimensions
mm
Overall width of cutout**
260
Overall depth of cutout**
505
** Note cutout position is centred to the cooktop.
It is important that the induction cooktop receives adequate air supply.
For ventilation requirements please refer to the installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 12.01.2016
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. For full installation instructions & specifications visit
fisherpaykel.com
DATA SHEET
DATUM :
TOP OF BENCHTOP
300
B
300
B530
c
f
530
C
e
d
ii h
A
CLEARANCE :
COMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
g
CLEARANCE : REAR TOP OF OVEN
CLEARANCE : ADJACENT OVERHEAD CABINET
CLEARANCE : RANGEHOOD
PROFILE VIEW
0 100 200 400
millimetres
POWER CORD
LOCATION
POWER CORD
LOCATION
/