2. Fisher & Paykel
  3. CG604DX1
CG604DX1

Fisher & Paykel CG604DX1 User guide

  • Hello! I have reviewed the datasheet for the Fisher&Paykel CG604DX1 gas on steel cooktop. This document provides detailed information about the product's dimensions, installation clearances, and cutout specifications. I'm ready to answer specific questions about the product based on the data provided in this document.
  • What is the minimum clearance from the left edge of the cutout to the nearest vertical surface?
    What is the minimum clearance from the cooktop surface to a rangehood or downward-facing combustible surface?
    What is the overall width of the cutout?
600MM GAS ON STEEL COOKTOP
Model no:
CG604DX1
NB. Supplied for NG with an LPG conversion kit included.
Dimensions
mm
A Height of chassis (below top of benchtop)
59
B Overall width of cooktop
600
c Overall depth of cooktop
50
D Height from counter datum to top of cooktop surface
6
E Depth of front control panel
85
F Depth of cooktop cooking area
442
G Width of chassis
555
H Depth of chassis
486
I Distance from top of counter to centre of gas inlet on
product
0
Minimum Clearances
mm
Minimum clearance from left edge of cutout to nearest vertical
surface
10
Minimum clearance from right edge of cutout to nearest vertical
surface
115
Minimum clearance from rear edge of cutout to nearest
combustible surface
160
Minimum clearance from rear edge of cutout to nearest non-
combustible surface
45
Minimum clearance below top of benchtop to combustible
surface
70
Minimum clearance below top of benchtop to Fisher & Paykel
oven or nearest non-combustible surface
65
Minimum clearance from cooktop surface to downwards-facing
tiled or fire resistant surface
500
Minimum clearance from cooktop surface to rangehood or
downward facing combustible surface
650
Minimum clearance from cooktop surface to any other overhead
exhaust fan
800
Cutout Dimensions
mm
Overall width of cutout*
560
Overall depth of cutout*
490
* Note cutout position is centred to the cooktop width but offset to the
cooktop depth. Cutout front depth is 9mm from the front edge of the product.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 29.07.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2''). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATA SHEET
600
50
59
DATUM :
TOP OF COUNTERTOP
B
G
C
F
E
D
A
I
H
FRONT VIEW
PLAN VIEW
PROFILE VIEW
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : FIRE RESISTANT SURFACE
CLEARANCE : RANGEHOOD or COMBUSTIBLE SURFACE
CLEARANCE : OTHER OVERHEAD EXHAUST FAN
/