ITC HMTLVVKK-LLLWL-10 User manual

HMTLVVKK-LLLWL-10
ITC
Brand
ITC
Model
HMTLVVKK-LLLWL-10
Category
Car kits
Type
User manual

ITC HMTLVVKK-LLLWL-10 is a versatile and durable LED lighting solution designed for various applications. It features flexible light strips that can be shaped and bent to fit different contours, making it ideal for under-cabinet lighting, cove lighting, and other accent lighting tasks. The product's construction ensures longevity and reliability, providing consistent performance for years to come.

ITC HMTLVVKK-LLLWL-10 is a versatile and durable LED lighting solution designed for various applications. It features flexible light strips that can be shaped and bent to fit different contours, making it ideal for under-cabinet lighting, cove lighting, and other accent lighting tasks. The product's construction ensures longevity and reliability, providing consistent performance for years to come.

3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • sales@itc-us.com • DOC#: 710-00114 • Rev D: 06/30/21
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
1. Determine installation location and drill a hole in the mounting surface. Make sure to accommodate the driver box if using RGBW
flex light.
Installation Considerations For All Flexible Lighting Products
• Do not bend lighting more than necessary. Refer to page two for bend radius minimums.
• Only bend the LED ribbon in one natural direction, do not try to bend in an unnatural direction such as twisting.
**Installation Considerations For HMTL Flexible Lighting
• Unroll the entire length of HMTL before installing.
• Start installation at the wire lead end.
• When installing the light on the mounting surface, make sure to push towards the wired end.
• Do not use any roller as that may cause damage to the LED circuit.
• Each RGBW flex light length will include a driver that prevents the RGB LED and white LED from turning on at the same time. Care should be taken during installation to accom-
modate the size of the driver box (see dimensional drawing below).
PARTS / TOOLS NEEDED:
Application Specific
Sealant
Flex Light & Mounting Clips Power Drill
(not provided)
#6 pan head screws
(not provided) (not provided) Butt Splices
(not provided)
2. Secure clips to mounting surface using
#6 pan head screws (not provided).
3. Feed the wires into the hole and apply
application specific sealant* around the
hole and wires.
*Sealant here
*Clip spacing is dependant on application, when
going around curves clip spacing should be closer.
4. Secure the light in the track by gently
pushing into clips
*HMTL flexible lighting cannot be field cut. Field cutting the light will void the warranty.
Driver Box (applies to RGBW only)
2” 1”Ø
INSTALLATION INSTRUCTIONS
Wander™ Flex Light
Part#: HMTLVVKK-LLLWL-10
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00114 • Rev D • 06/
Page 1 of 2
3030 Corporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • sales@itc-us.com • DOC#: 710-00114 • Rev D: 06/30/21
5.04
4.33
R20.0" MIN
DESIGN STATE:
INSTALLATION INSTRUCTION
Do not twist tapelight
ALWAYS INSTALL WIRE END FIRST!
CAUTION
MINIMUM BEND RADIUS
LATERAL BEND
R0.562" MIN
TOP TO BOTTOM BEND
5. Follow the wiring diagram below to wire the light to your system.
HMTL Flex Light
Red (+)
Black (-)
Green (G)
Neutral (N)
Load (L)
To 110V - 277V
Power
Positive (+)
Negative (-)
Constant Voltage
Class 2 Power Supply
13.6 V DC or 24V DC
Red (-)
White (-)*
Green (-)
Blue (-)
Red (+) Black (-)
Constant Voltage
Class 2 Power Supply
13.6V DC or 24V DC
HMTL Flex Light
RGBW
Controller
sold separately
Green (G)
Neutral (N)
Load (L)
Black (+)
*Note the RGB lights will not have a white wire
  • Page 1 1
  • Page 2 2

ITC HMTLVVKK-LLLWL-10 User manual

HMTLVVKK-LLLWL-10
ITC
Brand
ITC
Model
HMTLVVKK-LLLWL-10
Category
Car kits
Type
User manual

ITC HMTLVVKK-LLLWL-10 is a versatile and durable LED lighting solution designed for various applications. It features flexible light strips that can be shaped and bent to fit different contours, making it ideal for under-cabinet lighting, cove lighting, and other accent lighting tasks. The product's construction ensures longevity and reliability, providing consistent performance for years to come.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents