Ava Bullet Installation guide

Bullet
Brand
Ava
Model
Bullet
Type
Installation guide

Ava Bullet is a high-performance security camera designed to provide crystal-clear images and reliable surveillance. With its PoE (Power over Ethernet) capability, you can easily set it up with a single cable for both power and data transmission. The camera features a robust build and a weatherproof design, making it suitable for both indoor and outdoor use. Its adjustable lens and mounting options allow for flexible positioning and precise monitoring of your desired areas.

Ava Bullet is a high-performance security camera designed to provide crystal-clear images and reliable surveillance. With its PoE (Power over Ethernet) capability, you can easily set it up with a single cable for both power and data transmission. The camera features a robust build and a weatherproof design, making it suitable for both indoor and outdoor use. Its adjustable lens and mounting options allow for flexible positioning and precise monitoring of your desired areas.

Mounting guide
Bullet • Mounting guide | 2
Important warnings and safety instructions
Avoid exposing the camera to shocks, high pressure or temperatures above 50oC.
Avoid placing the camera near fans, ventilation or other noise sources. This will degrade audio performance.
Avoid scratching or leaving ingerprints on the lens cover, this degrades image quality. If possible, keep the protective
plastic on the lens cover during installation.
Do not clean the camera with harsh detergents, gasoline or chemicals such as Acetone.
Do not try to repair the unit yourself. Refer all servicing of the camera to Ava or contact a reseller.
This product should be supplied by a Power over Ethernet (PoE) Power Sourcing Equipment (PSE) compliant to IEEE 802.3af.
The PSE should be UL listed and marked “Limited Power Source” or “LPS”. The output should be rated 48V and 12W minimum
from the connected port.
The camera and the PoE PSE must be installed within the same building, as described by Environment A of the IEEE 802.3af
standard. The PoE PSE must be properly grounded.
Bullet • Mounting guide | 3
Box content
Bullet • Mounting guide | 4
Using the wall bracket
Screws are not included. The installer must use suitable fasteners.
12A 2B
Bullet • Mounting guide | 5
Opening the housing and removing cable gland
It’s easier to access the screws when the ball joint is moved to an angle.
3 4
Bullet • Mounting guide | 6
Installing the camera on to the wall bracket
5 6
Bullet • Mounting guide | 7
Installing cable gland and connecting ethernet cable
7
9
8
10 11
Bullet • Mounting guide | 8
Connect the camera and adjust the picture
Add the Camera to Ava Aware and ensure that the
video stream is working.
12
Close the camera and tighten the two screws
on the rear cover.
13
When the correct position is obtained, irmly tighten the screws (3-4Nm) to lock the position.
14
Bullet • Mounting guide | 9
Change lens orientation, horizontal (16:9) - vertical (9:16)
Bullet • Mounting guide | 10
Change lens orientation, horizontal (16:9) - vertical (9:16)
Ensure the camera body has been opened before attempting to rotate the lens
HORIZONTAL
VERTICAL
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Ava Bullet Installation guide

Bullet
Brand
Ava
Model
Bullet
Type
Installation guide

Ava Bullet is a high-performance security camera designed to provide crystal-clear images and reliable surveillance. With its PoE (Power over Ethernet) capability, you can easily set it up with a single cable for both power and data transmission. The camera features a robust build and a weatherproof design, making it suitable for both indoor and outdoor use. Its adjustable lens and mounting options allow for flexible positioning and precise monitoring of your desired areas.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents