York Fitness K850 User manual

Brand: York Fitness

Model: K850

Category: Fitness, gymnastics & weight training

Type: User manual

York Fitness K850 is a versatile gym equipment that provides a full-body workout. With its adjustable resistance levels, it can accommodate users of all fitness levels. The K850 features a variety of exercise stations, including a press, lat pulldown, low row, leg extension, and pec station. This allows for a wide range of exercises targeting different muscle groups. The sturdy construction and high-quality materials ensure durability and stability during use. Overall, the York Fitness K850 is an excellent choice for home gyms, offering a comprehensive and effective workout experience.

INSTRUCTION MANUAL

25/01/05

PRODUCT MAY VARY SLIGHTLY FROM THE ITEM PICTURED

COMPLIES WITH EUROPEAN STANDARD

EN957 CLASS HC 1,2 & 8

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.

York Fitness K850 /01

If the box containing the parts for the York Fitness K850

Gym was unopened when you purchased it and there is a

shortage, please notify us by mail and send a copy of your

receipt. If the box was opened and there is a shortage, the

dealer is responsible. Please indicate to us the part number

which is missing and we will return the missing part by return

mail.

TOOLS NEEDED TO ASSEMBLE York Fitness Gym K850

a) wrenches :- 2 x 3/4" 19mm

1 x 5/8" 16mm

b) large screwdriver

c) hammer

d) 10mm Allen Key

PLIERS SHOULD NOT BE USED!!

WARNING:

It is important that you do not destroy these instructions, they

will need to be kept for further reference

WARNING: YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!

WARNINGS:

1. Always consult your doctor before undertaking any

exercise program.

2. Ensure that all nuts and bolts are fully tight before

using any exercise equipment.

3. Always wear suitable clothing and footwear e.g.

tracksuit and training shoes.

4. Children should not be allowed on or around the

machinery or equipment, even when not in use.

5. After eating allow 1 to 2 hours prior to exercising.

6. Always warm up well before exercising as this will

prevent straining muscle.

7. Always read and follow the manufacturers assembly

and user instructions.

8. Remove jewellery, rings, chains and pins before

exercising.

9. Check for full engagement of locking pins.

10. Check that any of the adjustment devices are not

projecting.

11. Give special attention to the cables, pulleys and

locking devices as they may wear.

12. Injuries to health may result from incorrect or

excessive training.

13. Always use your gym on a flat level surface.

14. Always use your gym in adequate space e.g. at least

2ft. (60cm) clearance on each side and front (the rear

can be close to a wall).

15. We recommend you never lift weights alone. There

should always be someone available to assist you.

Training with others can help motivate you.

N.B. This list should not be taken as exhaustive

CARE & MAINTENANCE

1. Use a warm,damp cloth to keep upholstery clean.

2. Check for full engagement of locking pins.

3. Give special attention to the cables, pulleys and

locking devices as they will wear.

4. Check that any of the adjustment devices are not

projecting.

Distributed by:

YORK BARBELL (U.K.) LTD.

CHURCHILL WAY, DAVENTRY,

NORTHANTS, NN11 4YB, ENGLAND

GENERAL ENQUIRIES

TEL: (01327) 701800

CUSTOMER SERVICE HELPLINE

TEL: (01327) 701824

FAX: (01327) 706704

E-MAIL: [email protected]

yorkfitness.com

Distributed by:

YORK BARBELL (AUST.) PTY. LTD.

UNIT 1, LOT 2, SWAFFHAM ROAD

MINTO, N.S.W. 2566

SYDNEY, AUSTRALIA

GENERAL ENQUIRIES

TEL: (02) 9603 8444

FAX: (02) 9603 8555

E-MAIL: [email protected]

This machine should be assembled finger tight in the beginning to allow for proper alignment.

this equipment has been supplied with some nyloc locknuts. It is essential that the nuts are fully

tightened onto the bolts, so that the bolts penetrates through the nyloc insert.

yorkfitness.com

BEFORE ASSEMBLY

This must be read before you start assembling this unit.

Great care has been taken in design and how to assemble

this unit. All bags of nuts and bolts have been packed with

ease of assembly in mind. You must follow the assembly

instructions exactly as outlined.

You will need at least one person to help you assemble this

unit, two would be better. Assemble this unit starting at the

beginning and work to the end. The assembly instructions are

set out so that you are only doing one section at a time,

therefore you will finish one section and move on to the next.

Do not do what most people do, when all else fails they read

the assembly instructions. If something is missing when

assembling this unit, you must notify us of the part number of

the exact nut, bolt or part that is missing and the colour of

the model you purchased.

To help you assemble this unit we have used line drawings.

Check the images for the exact positioning of the parts.

This unit will need to be checked at least once a week for

wearing wire ropes, nuts and bolts that can work loose,

upholstered pieces working loose and wear on pivot assem-

blies.

WARNING: WIRE ROPES DO WEAR OUT!!

Check wire ropes for wear and tear regularly.

This is for your own safety.

WARNING: YOU ARE RESPONSIBLE FOR YOUR OWN

SAFETY!!

Distributed by:

YORK FITNESS (TAIWAN) LTD.

4F-A2. No.51

SEC 2, KUANG Yi ROAD,

TAICHUNG 408, TAIWAN

GENERAL ENQUIRIES

TEL: +886-4-2319-3448

FAX: +886-4-2319-3449

E-MAIL: [email protected]

APPROXIMATE RESISTANCE GUIDE

TOP PLATE & STEM PLUS 21 WEIGHT PLATES GIVES TOTAL 100 KG ( 220 lbs ) Dimensions when

built : L = 166cm, W = 105cm, H = 206cm. G.W. = 251kg.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /02

RESISTANCE : WEIGHT

Press 1 : 1 Resistance same as weight selected

Lat Pulldown 1 : 1 Resistance same as weight selected

Low Row 1.5 : 1 Resistance 1.5 times weight selected

Leg Ext. 1.5 : 1 Resistance 1.5 times weight selected

Pec 0.5 : 1 Resistance half the weight selected

GENERAL

We recommend you have someone aasist you in lifting and

assembling your York Fitness K850 Gym.

Follow these instructions carefully and it will make it easlier

for you to asemble your York Fitness K850 Gym.

Lay base assembly on floor as shown

Ensure that the 3 large holes & the 2 holes shown

are positioned correctly.

* You will need help for this stage.

Fit the rear vertical at the rear of the base C

The rear vertical fits over the base C at the back.

(P.T.O. for close up pic)

Bolt side tubes on either side of bracket

Fitting rear upright tube (Get someone else to

support tube when fitting)

M10 x 80 CARRIAGE BOLT x2

M10 NYLOC x2M10 WASHER x2

Base C

Base R

Base L

2 holes

towards

back

3 large

holes

Rear

vertical

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /03

Fitting front tube (Get someone else to support tube

when fitting)

Top orientation of the two

uprights

Bolt front tube onto midpoint of base centre tube

Use 1 washer with each nut

Stop

tube at

back

M10 x 70 CARRIAGE BOLT x2

M10 NYLOC x2

Rear

vertical

Base C

Hand tighten the nuts & bolts

Front

tube

(leans

forwards)

Washers

this side

M10 WASHER x2

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /04

Fit front stabilising tube onto base centre tube,

bolt side tubes on either side of lower bracket

Fitting front stabilising tube (Get someone else to

support tube when fitting)

Bolt upper bracket of front stabilising tube onto

front upright tube

M10 x 80 CARRIAGE BOLT x2

M10 x 70 CARRIAGE BOLT x2

M10 WASHER x2 M10 NYLOC x2

M10 WASHER x2

M10 NYLOC x2

Front

stabilising

tube

Base C

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /05

Fit top tube onto uprights, bolt rear first.

Fitting top tube (Get someone else to support tube

when fitting)

* Have somebody support the top tube whilst the

other person secures it.

* Ensure that the lat holder is at the front, with the

prongs pointing upwards.

* Ensure the larger hole, and the double hole is

towards the back.

Bolt top tube onto front upright

M10 x 70 CARRIAGE BOLT x2

M10 WASHER x2

M10 NYLOC x2

M10 x 70 CARRIAGE BOLT x2

M10 WASHER x2

M10 NYLOC x2

Double

hole

Make sure lat

bar holder at

front

Larger hole

towards back

Lat holder

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /06

Slot two weight tubes into right base tube (align

holes at bottom of weight tubes with those in base)

Bolt bottom of weight tubes into base

Fitting weight tubes (Get someone else to support

tubes when fitting)

M10 x 65 HH BOLT x2

M10 NYLOC x2M10 WASHER x4

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /07

Slot one large washer onto each of the weight

tubes from top and slide down to bottom

Slot one large spring onto each of the weight tubes

from top and slide down to bottom

Springs and large washers at bottom of weight

tubes

Very carefully slot weights one at a time from

top down to the bottom of weight tubes) Do not drop

Complete weight

set fitted (you may

require some help

when fitting

weights)

19 weight

plates in

total

Make sure selector

hole faces outwards

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /08

Bolt weight selection tube into top weight plate

and slot onto top of weight tubes, slide to bottom

Slot locking collar over top of one of the weight tubes

and slide to bottom

Locate these parts

M10 x 70 CARRIAGE BOLT x2

M10 NYLOC x2

M10 WASHER x2

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /09

Slot pulley wheel into top tube before fitting rear bolt

through weight tube retainer to top tube (from right

to left)

Make sure that the bolt passes through the centre

of the pulley.

Slot weight tube retainer over top of weight tubes

and secure both weight tube retaining bolts to top

tube from right side to left.

When finished,the weight tube retainer should look

PULLEY SPACERS x2

(SMALL 12.7)

Use bottom hole

Small pulley spacer

95 mm

pulley

wheel

Use 1 small pulley spacer on each side.

Fit front leg to front end of upholstery mount tube

Bolt upholstery mount tube to the rear most hole

of bracket on front stabilising tube.

Sit front end of upholstery mount tube on floor while

securing bolt.

M10 x 75 HH BOLT x1

M10 NYLOC x1

M10 WASHER x2

M10 x 75 HH BOLT x1

M10 NYLOC x1

M10 WASHER x2

Use rear

bracket hole

Locate the

front

leg & fixings

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /10

2 holes at

this end

Locate the upholstery support.

2 holes at end

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /11

Bolt through rear most hole of bracket on front leg

Front foot and front leg

Bolt carriage bolt through from rear to

secure front foot onto front leg

M10 x 70 CARRIAGE BOLT x2

M10 WASHER x2

M10 NYLOC x2

Top Hole

Washers here

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /12

Slot bolt in from left side of front leg to fit pulley

wheel

Locate the lower

support tube.

Fit lower support tube onto right side of front leg

using pulley wheel bolt

Lower support tube in place

Secure lower support tube with nut and washer

M10 x 90 HH BOLT x1

M10 NYLOC x1

M10 WASHER x2

Washer

both sides

Washer

Large pulley

spacer

on each side

34. Insert pulley wheel from the back into pulley

bracket on front stabilizing tube.

35. Insert M10 x 70mm HH Bolt through pulley

bracket, & allign lower support. (feed from left hand

side)

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /13

M10 x 70 HH BOLT x1

M10 NYLOC x1M10 WASHER x2

Fit rear end of lower support onto front stabilizer

pulley wheel retaining bolt and secure.

Front

stabilizing

tube

Pulley

bracket

Lower

support

Lower

support

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /14

Locate the press arm pivot.

* Keeping the logo upright & facing front, position

the press arm pivot.

* The pivot point is located on the rear upright.

* Ensure that the press arm pivot is located each

side of the front upright tube.

* Once solid pivot bar is fit, the press arm pivot will

rest on the stop.

Slot solid bar through one side of press arm and

align with bush in rear upright

Feed solid bar through fully.

P.T.O. for fixings

Logo

Rear

upright

Stop

Pivot

Front

upright

tube

Pivot

point

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /15

Secure solid bar with screw and washer on both ends

Screw and washer fitted

Fit left pec arm in same way

Secure both pec arms by fitting a screw and

washer to the rear of the solid mounting bar on

press arm

28mm WASHER x2

M8 x 15mm

ALLEN HEAD BOLT x2

28mm WASHER x2

M8 x 15mm

ALLEN HEAD BOLT x2

Use allen key to tighten

Cams at bottom

Front

Locate:

Right pec arm

Slot right pec arm onto

solid bar on front right

of press arm from rear.

Arms can rest in flat

position once located.

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /16

Locate the Leg curl and

Leg extension assemblies.

Align top of Leg extension

assembly inside top

bracket of front leg.

Align top of Leg curl assembly outside top

bracket.

Bracket

Leg extension

Leg curl

Leg extension

Leg curl

M12 x 85 HH BOLT x1

M12 WASHER x2 M12 NYLOC x1

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /17

A second person should now secure with nut, bolt

and washers

Leg curl and extension assemblies fitted.

When positioned correctly

* Leg extension inside of bracket

* Leg curl outside of bracket

Washer each side

Leg

curl

Leg

extension

Bracket

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /18

Locate the 2 x footplates

Lay foot plates either side front of base centre tube

Slot rod through footplates and base centre tube

secure with screws and washers

Slide arm pads onto pec arms (this may be quite tight)

Slide pads back so that large mounting hole on inside

of pec arm is clear.

Locate 2 x Slot handles into large mounting hole on

inside of both pec arms and secure with bolt and

washers.

M10 WASHER x2

M10 x 25MM

HH BOLT x2

Footplates

Rod

46.5cm

Large

pads

M10 WASHER x2

M8 x 15mm BOLT x2

SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY

York Fitness K850 /19

Webbed strap pulley bracket assembly

Assemble wide pulley wheel into bracket along with

webbed strap

* Note, the webbed strap will need to be positioned

flat underneath the roller before the bolt is located.

Fit narrow pulley wheel into bracket and secure with

nut, bolt and washers

M10 x 70 HH BOLT x1

M10 NYLOC x1M10 WASHER x2

Hanging

bracket

Roller

Strap under Roller

M10 x 45 HH BOLT x1

M10 NYLOC x1M10 WASHER x2

Page is loading ...

York Fitness K850 User manual

Brand: York Fitness

Model: K850

Category: Fitness, gymnastics & weight training

Type: User manual

Download PDF

report

York Fitness K850 User manual

York Fitness K850 User manual

Related papers

Other documents