Ranger design 84-U1830 Installation guide

  • Hello! I've reviewed the Installation Guide for the Ranger Design 84-U1830 Fold-Away Shelf Tray. This document provides step-by-step instructions on how to assemble and install the shelf tray, including the required tools and parts. I'm ready to answer any questions you might have about the installation process or the features of the shelf tray.
  • What tools are required for assembly?
    What components are included in the box?
    What type of screws are used to assemble the end panels to the shelf tray?
    What type of rivets are used to attach end caps to the shelf tray?
INSTALLATION GUIDE
84-U1830 Fold-Away Shelf Tray
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 2
QUICK START GUIDE
REQUIRED ITEMS
2
PERSONS
q 1.1 Setup...............................................................................................................................................
q 1.2 Fold-Away Shelf Tray Assembly......................................................................................................
3 - 4
5 - 10
Phase 1 - Assembly
q Cordless Impact
q Tape Measure
q 1/2" Socket
q 3/8" Driver Bit
q Knife
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
Item No. Description Qty.
84-007 End Cap ( Left ) 1
84-008 End Cap ( Right ) 1
84-015 Threaded Plate 2
84-1918 End Panel ( Left ) 1
84-2018 End Panel ( Right ) 1
60-17.875×30 Shelf Tray 1
94-3056 Assembly Fastener Kit 1
96-3038 Install Fastener Kit 1
1.1.1 Unpack components; compare with the bill of materials.
84-U1830
84-015
84-1918 84-2018
84-015
84-007 84-00860 - 17.875 × 30
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 4
94-3056 Fastener Assembly
96-3038 Fastener Assembly
# 92-102
Screw HWH
#14 × 1"
ZINC
# 96-200 Multi-grip alum/steel
3/16"×1/2"
#92-102 Screw #14 × 1"
#96-200 Closed Rivet
Hex Bolt
5/16"-18 × 3/4"
GR-5 ZINC
# 90-204
# 98-116
Flat Washer
5/16"
ZINC
# 98-122
Lock Washer
5/16"
ZINC
#90-204 Hex Bolt 5/16" × 3/4"
#98-122 Lock Washer
#98-116 Flat Washer
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 5
PHASE 1 – ASSEMBLY
1.2 FOLD-AWAY ASSEMBLY
1.2.1 Screw the left and right end panels to the shelf tray.
84-1918
84-2018
HARDWARE USED
TOOLS
q Cordless Impact
q 3/8" Driver Bit
#92-102 Screw #14 × 1"
60 - 17.875 × 30
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 6
1.2.2 Rivet the end caps on the front edge of the shelf tray.
#96-200 Closed Rivet
HARDWARE USED
TOOLS
q Rivet Gun
84-007
84-008
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 7
From
To
1.2.4 Attach the shelf trays to the posts.
HARDWARE USED
16×
TOOLS
q Cordless Impact
q 1/2" Socket
#90-204 Hex Bolt 5/16" × 3/4"
#98-122 Lock Washer
#98-116 Flat Washer
minimUm
of 6 Hole Space
minimUm
of 6 Hole Space
For technical support, contact us at 1-800-565-5321 84-U1830 Installation Guide | REV. A1 | Page 8
“You have successfully installed your
Fold-Away Shelf Tray
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
/