Ranger design 62-U5070 Installation guide

Brand
Ranger design
Model
62-U5070
Type
Installation guide
INSTALLATION GUIDE
62-U5070 Partskeeper Carry Case
( aluminum )
On-SHElF mOunTinG
unDER-SHElF mOunTinG
For digital install guide, visit:
https://rangerdesign.com/
products/partskeeper-parts-
organizer-carry-case-w-holder-
62-u5070/
For technical support, contact us at 1-800-565-5321 62-U5070 Installation Guide | REV. C2 | Page 2
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3
Phase 1 - Assembly
Phase 2 - Installation
5
6
q 2.1 On-shelf Install.................................................................................................................................
q 2.2 Under -shelf Install.............................................................................................................................
q Ratchet
q Marker
q Cordless Drill
q Cordless Impact
q Rivet Gun
q 1/2” Wrench
q 1/2" Socket
q 1/2" Drill Bit
q 3/16" Drill Bit
q 5/16” Drill Bit
q 5/16” Socket
WARNING
Before the installation, carefully read the supplied installation guide to avoid possible injuries and damages
resulting from incorrect installation. Always keep the installation guide in an accessible location at all times
for reference during installation.
Installers must always wear appropriate safety gear during installation. This may include but is not limited to
gloves, steel toed shoes, and safety glasses.
It is the installer’s responsibility to ensure the install is safe and secure. For further questions please contact
us at 1-800-565-5321.
For technical support, contact us at 1-800-565-5321 62-U5070 Installation Guide | REV. C2 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
50-700 Partskeeper Holder 1
50-701 Slide For Parskeeper 2
62-U5079 Plastic Partskeeper Case 1
94-5011 Assembly Fastener Kit 1
96-5011 Install Fastener Kit 1
BILL OF MATERIALS
62-U507950-700
50-701
For technical support, contact us at 1-800-565-5321 62-U5070 Installation Guide | REV. C2 | Page 4
94 - 5011 Fastener Kit Fastener Assembly
96 - 5011 Fastener Kit Fastener Assembly
1.1.3 Fastener kits.
4×4×
Closed Rivet
3/16" × 3/8"
ALUM/STEEL
# 96-203
2×2×
Closed Rivet
3/16" × 1/4"
ALUM/STEEL
# 96-202
#96-202 Closed Rivet
2× 2× FOR anOTHER FOR anOTHER 50-700 50-700
4× 4× FOR invERTED inSTallFOR invERTED inSTall
#96-203 Closed Rivet
4×4× # 92-200
Screw HFH
#10 - 16 × 3/4"
ZINC
2×2×
Bolt Hex Head
5/16"-18 × 1 - 1/4"
GR-5 Zinc
# 90-212
Spacer
0.375" ID, × 1.0" OD × 0.25" LONG
NYLON
# 98-157
2×2×
4×4×
Closed Rivet
3/16" × 1/4"
ALUM/STEEL
# 96-202
#96-202 Closed Rivet
4× 4× FOR On-SHElF inSTallFOR On-SHElF inSTall
4× 4× FOR unDER SHElF inSTallFOR unDER SHElF inSTall
#92-200 Screw #10 × 3/4"
FOR unDER-SHElF inSTallFOR unDER-SHElF inSTall
# 94-104
Nut Hex
5/16"-18
ZINC
2×2×
6×6× Washer Flat
SAE 5/16" ZINC
# 98-110
2×2×
Washer Lock
Spring Regular
5/16" ZINC
# 98-122
2×2× # 98-191 Spacer NYLON
0.318" ID, × 15-32" OD × 3/8" LONG
#90-212 Bolt Hex Hd 1-1/4"
#98-110 Washer
#98-191 Nylon Spacer
#98-110 Washer
#98-110 Washer
#98-157 Nylon Spacer
#98-122 Lock Washer
#94-104 Hex Nut
FOR On-SHElF inSTallFOR On-SHElF inSTall
2×2× 2×2×
For technical support, contact us at 1-800-565-5321 62-U5070 Installation Guide | REV. C2 | Page 5
PHASE 2 – INSTALL
2.1 OVER-SHELF INSTALL
TOOLS
q Cordless Drill
q Marker
q 3/16" Drill Bit
2.1.1 • Place the partskeeper holder on top of 14" deep shelf or deeper.
• Mark the holes from the partskeeper holder to the shelf extrusion, then drill the mark using 3/16" drill bit.
mark, then drill
mark, then drill
VIEW FROM TOP OF UNIT
2.1.3 • Install the partskeeper holder to the shelf tray by riveting and bolting the partskeeper holder.
• After installing the partskeeper holder slide the partskeeper case inside the partskeeper holder.
#90-212
#98-110
#98-191
#98-110
#98-122
#94-104
TOOLS
q Cordless Drill
q Marker
q 5/16" Drill Bit
2.1.2 • Mark the holes from the partskeeper holder to the shelf panel, then drill the marks.
TOOLS
q Cordless Drill
q Marker
q 1/2" Drill Bit
FOR WOOD SHELF FOR COMPOSITE SHELF
NOTE: Do not use the
nylon spacer (98-191)
for Plywood install.
TOOLS
q Rivet Gun
#96-202 Closed Rivet
HARDWARE USED
4× FROm 96-5011
2× FROm 96-5011
HARDWARE USED
TOOLS
q Rivet Gun
q 1/2" Socket
q Ratchet
q 1/2” Wrench
#90-212 Bolt Hex Hd 1-1/4"
#98-110 Washer
#98-191 Nylon Spacer
#98-110 Washer
#98-122 Lock Washer
#94-104 Hex Nut
M8 10-12 Nm
For technical support, contact us at 1-800-565-5321 62-U5070 Installation Guide | REV. C2 | Page 6
PHASE 2 – INSTALL
2.2 UNDER-SHELF INSTALL
2.2.1 • Attach the partskeeper slider to the partskeeper holder.
#96-203 Closed Rivet
HARDWARE USED
4× 94-5011
TOOLS
q Rivet Gun
NOTE: The 50-701 should point toward the inside of the unit.
50-701
2.2.2 • Place the partskeeper holder under the 14" deep shelf or deeper.
• Mark the holes from the partskeeper holder to the shelf tray, then drill the marks.
mark, then drill
#92-200 Screw #10 × 3/4"
TOOLS
q Cordless Impact
q 5/16" Socket
HARDWARE USED
4× 96-5011 FROnT
2.2.3 • Install the partskeeper holder to the shelf tray by screwing and bolting partskeeper holder to the shelf tray.
• After installing the partskeeper holder slide the partskeeper case inside the partskeeper holder.
“You have successfully installed your 62-U5070
Thank you for doing business with us.”
#90-212
#98-110
#98-191
#98-110
#98-110
#98-157
#98-122
#94-104
TOOLS
q Cordless Drill
q Marker
q 5/16" Drill Bit
TOOLS
q Cordless Drill
q Marker
q 1/2" Drill Bit
FOR WOOD SHELF FOR COMPOSITE SHELF
TOOLS
q Ratchet
q 1/2” Wrench
q 1/2" Socket
HARDWARE USED
2× 96-5011 back
#90-212 Bolt Hex Hd 1-1/4"
#98-110 Washer
#98-191 Nylon Spacer
#98-110 Washer
#98-110 Washer
#98-157 Nylon
#98-122 Lock Washer
#94-104 Hex Nut
NOTE: Do not use the
nylon spacer (98-191)
for Plywood install.
M8 10-12 Nm
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Ranger design 62-U5070 Installation guide

Brand
Ranger design
Model
62-U5070
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents