Ranger design 6061 Installation guide

Brand
Ranger design
Model
6061
Category
Wall & ceiling mounts accessories
Type
Installation guide
INSTALLATION GUIDE
6061 PAPER HOLDER
Accessories ( Aluminum )
For technical support, contact us at 1-800-565-5321 6061 Installation Guide | REV. D1 | Page 2
REQUIRED ITEMS
1
PERSONS
q Cordless Drill
q Rivet Gun
q Tape Measure
q Marker
q 7/32" Drill Bit
q Knife
PHASE 1 – ASSEMBLY
1.1 SETUP
6061
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
6061 Paper holder, extra deep, 2-slot 1
96-6002 Customer Installation Fastener Kit 1
For technical support, contact us at 1-800-565-5321 6061 Installation Guide | REV. D1 | Page 3
Hardware AssemblyInstallation Fastener Bag
Closed End Blind Rivet
3/16" Type #64
# 96-202
4×
4×
#96-202 Closed End Blind Rivet
PHASE 2 – INSTALLATION
2.1 PAPER HOLDER INSTALLATION
2.1.1 • Remove the PVC from all the parts.
• Mark the rivet holes through the circle openings, then drill the marks.
• Place the paper holder against a at surface.
• Mark the rivet holes through the circle openings
then drill them.
NOTE: Ensure that there is nothing obstructing
the other side of the holes e.g. shelves.
TOOLS
q Cordless Drill
q Marker
q 7/32" Drill bit
2.1.1 Rivet the holes.
TOOLS
q Rivet Gun
HARDWARE USED
4×
#96-202 Closed End Blind Rivet
For technical support, contact us at 1-800-565-5321 6061 Installation Guide | REV. D1 | Page 4
“You have successfully installed your
6061 Paper Holder
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Ranger design 6061 Installation guide

Brand
Ranger design
Model
6061
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents