2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Ranger design
  6. 84-U2060

Ranger design 84-U2060 Installation guide

  • I have analyzed the provided installation guide for the Ranger Design Shelf Tray model 84-U2060. This document contains step-by-step instructions for setting up and assembling the fold-away shelf, including parts verification, panel attachment and end cap riveting. I'm ready to answer your questions about this product.
  • What tools are required for assembly?
    How many persons are needed for assembly?
    What components should be unpacked and verified?
    Which hardware is used to attach the end panels to the shelf tray?
INSTALLATION GUIDE
84-U2060 Fold-Away Shelf Tray
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 2
QUICK START GUIDE
REQUIRED ITEMS
2
PERSONS
q 1.1 Setup...............................................................................................................................................
q 1.2 Fold-Away Shelf Tray Assembly......................................................................................................
3 - 4
5 - 10
Phase 1 - Assembly
q Cordless Impact
q Tape Measure
q 1/2" Socket
q 3/8" Driver Bit
q Knife
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.2 Verify all parts are present.
Item No. Description Qty.
84-007 End Cap ( Left ) 1
84-008 End Cap ( Right ) 1
84-015 Threaded Plate 2
84-1720 End Panel ( Left ) 1
84-1820 End Panel ( Right ) 1
60-19.875×20 Shelf Tray 1
94-3056 Assembly Fastener Kit 1
96-3038 Install Fastener Kit 1
1.1.1 Unpack components; compare with the bill of materials.
84-U2060
84-015
84-1720 84-1820
84-015
84-007 84-00860 - 19.875 × 60
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 4
94-3056 Fastener Assembly
96-3038 Fastener Assembly
# 92-102
Screw HWH
#14 × 1"
ZINC
8×8×
# 96-200 Multi-grip alum/steel
3/16"×1/2"
4×4× 4×4×
8×8×
#92-102 Screw #14 × 1"
#96-200 Closed Rivet
8×8×
Hex Bolt
5/16"-18 × 3/4"
GR-5 ZINC
# 90-204
8×8× # 98-116
Flat Washer
5/16"
ZINC
8×8× # 98-122
Lock Washer
5/16"
ZINC
#90-204 Hex Bolt 5/16" × 3/4"
#98-122 Lock Washer
#98-116 Flat Washer
8×8×
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 5
PHASE 1 – ASSEMBLY
1.2 FOLD-AWAY ASSEMBLY
1.2.1 Screw the left and right end panels to the shelf tray.
84-1720
84-1820
HARDWARE USED
8×
TOOLS
q Cordless Impact
q 3/8" Driver Bit
#92-102 Screw #14 × 1"
60 - 19.875 × 60
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 6
1.2.2 Rivet the end caps on the front edge of the shelf tray.
#96-200 Closed Rivet
HARDWARE USED
4×
TOOLS
q Rivet Gun
84-007
84-008
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 7
From
To
1.2.5 Attach the shelf trays to the posts.
HARDWARE USED
16×
TOOLS
q Cordless Impact
q 1/2" Socket
#90-204 Hex Bolt 5/16" × 3/4"
#98-122 Lock Washer
#98-116 Flat Washer
maximUm
of 9 Hole Space
maximUm
of 9 Hole Space
For technical support, contact us at 1-800-565-5321 84-U2060 Installation Guide | REV. A1 | Page 8
“You have successfully installed your
Fold-Away Shelf Tray
Thank you for doing business with us.”
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
/