Warrior Products 800050, 800051, 800052, 800055, 800056, 800057 Installation guide

Hello! I've analyzed the installation instructions for the Leaf Spring Shim 800050 & 800060 Series from Warrior Products. This document details how to properly install the shims, including information about cross pin size and requirements for drilling, if needed. I am ready to answer your questions about the installation process or other specifics of this product.
How do these shims attach to the leaf springs?

What if the cross pin is not long enough?

What if I have a larger pin size than 5/16"?

Protecting Your Adventure Lifestyle

========================================================================================

QUALITY • INTEGRITY • INNOVATION • SERVICE

Warrior Products, Inc.

16850 SW Upper Boones Ferry Rd

Ste. A

Durham, OR 97224

Phone (888) 220-6861

Fax (503) 692-0364

800050 & 800060 Series

Leaf Spring Shims

INSTALLATION INSTRUCTIONS

NOTE: Leaf spring shims should be installed by someone with a strong aptitude in leaf spring suspension. If you are unsure

on how to use and install these shims, it is best if you refer to a professional.

1. These shims are designed to bolt into the leaf pack through the cross pin in the springs.

2. If your cross pin is not long enough to fit through the shim, you will need to get a longer pin

3. Cross-pin size is 5/16”. If you have a larger pin size, you will need to drill out the shim.

For more information on Warrior Products Jeep Parts and Accessories, please visit us on the web at