2. Warrior Products
  3. 847

Warrior Products 847 Installation guide

  • Hello, I'm your chat assistant. I've reviewed the installation instructions for the Warrior Products Cargo Hitch Rack. This document outlines the steps required for proper installation, including the need for a 2" receiver hitch and the use of a locking hitch pin. I'm ready to answer any questions you have about the product and its installation.
  • What size receiver hitch is needed?
    What is included in the kit?
    What kind of hitch pin is recommended?
Protecting Your Adventure Lifestyle
========================================================================================
QUALITY • INTEGRITY • INNOVATION • SERVICE
Warrior Products, Inc.
16850 SW Upper Boones Ferry Rd
Ste. A
Durham, OR 97224
Phone (888) 220-6861
Fax (503) 692-0364
[email protected]
CARGO HITCH RACK
INSTALLATION INSTRUCTIONS
IMPORTANT: 2” Receiver hitch required to install and use this product.
1. Begin by bolting the mount plate and the cargo basket together. The mounts have pre-existing
holes and mounting hardware is included in the kit.
2. If you do not already have a hitch pin, you will need to get one from an auto parts store. We
recommend using a locking hitch pin to deter theft.
3. Install by sliding rack stinger into hitch and pin into place.
If you need further assistance installing your product, please contact us by email at
[email protected] or call us at (888) 220-6861.
THANK YOU FOR PURCHASING WARRIOR PRODUCTS
/