American Megatrends Internet Appliance S803 User guide

Brand: American Megatrends

Model: Internet Appliance S803

Type: User guide

Addendum to Series 803 User’s Guide MAN-803-ADD1 Updated 2/28/02

Addendum to Series 803 User's Guide

This page is meant to replace page vii in the Preface.

Technical Support

AMI provides technical support for AMI products

purchased directly from AMI or from an AMI-authorized

reseller only.

If… Then…

You purchased this product from AMI or

from a certified AMI reseller,

Call AMI technical support at 770-246-8600.

Please be prepared to specify the serial

number of the product.

This AMI product was installed as part of a

system manufactured by a company other

than AMI or you purchased an AMI product

from an unauthorized reseller,

Call the technical support department of the

computer manufacturer or the unauthorized

reseller. AMI does not provide direct

technical support in this case.

If an American Megatrends motherboard fails to operate as

described or you are in doubt about a configuration option,

please call technical support at 770-246-8600.

Web Site We invite you to access the American Megatrends world

wide web site at:

http://www.ami.com/.

Packing List

You should have received the following:

• an Internet appliance board

• One nine-pin serial cable with a D-type connector

• the AMI Internet Appliance for Embedded

Applications User's Guide

Note: The Developer's Kit is a separate order item. Contact your

sales representative to order it. When calling, ask for part

number KIT-803DEV. The Developer's Kit includes the

following items:

• OCP daughter board with power switch and LAN

LEDs

• VGA daughter board

• 10 pin cable (for VGA daughter board)

• 12 pin cable (for OCP daughter board)

• 3 wire standby power cable

American Megatrends Internet Appliance S803 User guide

American Megatrends Internet Appliance S803 User guide

American Megatrends Internet Appliance S803 User guide

Related papers

Other documents