Jabra Noise Guide User guide

Jabra Noise Guide

How to sort measurements in File Explorer

Follow these steps to sort your Jabra Noise Guide measurements for a better overview of the

devices and the measurements related to these devices.

1. Start by exporting data from the internal log of the Jabra Noise Guide via USB, and then

importing them to the software. You can see how to import log files from the internal log in

the Jabra Noise Guide User Manual.

2. Click Open in Explorer in the bottom right corner.

3. Right-click and select New>Folder.

4. Name the folder after the Jabra Noise Guide device which contains these measurements.

5. Select all measurements related to this Jabra Noise Guide device and drag them to the

folder.

6. Do the same with the measurements from the other Jabra Noise Guide devices.

7. Go to the Measurement Library for the Jabra Noise Guide software. As you can see below,

it is now much easier to get an overview of the log files.

8. Click the Jabra Noise Guide unit in the left column to see the measurements for that device.