2. POLYWOOD
  3. PWS122-1-GY

POLYWOOD PWS122-1-GY, PWS122-1-MA, PWS122-1-WH Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the POLYWOOD PWS122-1-GY Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
9/14/2012
ASSEMBLY INSTRUCTIONS
CDD200, CDD201, CDD202
Qty. Description
on the arm supports
Step 1
Attach back of arm by threading
frame into the insert nuts
the attached dowel screw into the pilot hole
Model:
4mm Hex Key (included)
until the arm is snug against the back leg.
Step 2
Attach (4)1-3/4 bolts thru the seat
TOOLS NEEDED
ALLHARDWAREISCOATEDSTAINLESSSTEEL
__(1) CHAIR
__(2) ARM ASMB (RH/LH)
__(1) HARDWARE PACK
HDWPK-#8 SCREW PLUGS, 4X (EXTRAS)
1
CDD202
CDD201
A -1/4-20 X 1-3/4 WAFER SHCS
4
PILOT HOLE
ROTATE
CLOCKWISE
A
INSERT
NUTS
ROTATE
CLOCKWISE
CDD200
Step 2
Set table upright and tighten all bolts
__(1) Hardware pack
RT348, RCT348, RRT348, RBT348
Models: RT248, RCT248, RRT248, RBT248
Attach the leg assemblies to the table top using
(8) 3" screws.
(4) 3 1/4" Chair bolts.
Step 1
Attach feet to legs using
(4) 3" screws.
Qty. Description
Lay the table top on a flat surface.
4mm HEX KEY: INCLUDED
TOOLS NEEDED
Attach leg braces using
Step 3
__(1) Table top
__(4) Leg
__(2) Foot
__(2) Brace
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
9/19/2012
ASSEMBLY INSTRUCTIONS
4
FINE THREAD
B - 1/4-20 X 3-1/4 WAFER SHCS
Removable table plug
included in table
B
12
A - 14 X 3 SOCKET WAFER "B"
/