Troy-Bilt 25B554H711 Fast Start Guide

Type
Fast Start Guide
Attach the rope guide
to the upper handle.
Do NOT tighten.
A. Pivot handle upward
into extended position.
778-11984C© 2013 25B-554
Slip the starter rope
into the rope guide
and tighten the wing knob.
Attach the cable to the
depth control lever
Attach the cable to the blade control handle.
A. Insert the stud into the upper handle.
Starter
Rope
Handle
Blade Control Handle
Blade Control Cable
Depth Control Lever
Depth
Control
Cable
Rope Guide
Snap Fitting
Handle Knobs
A
B
B. Secure handle
by tightening
handle knobs.
B. Pivot the snap
fitting down
to secure it
in place.
A
C
A
B
B
A
D
C
B
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Oil Fill /
Dipstick
Primer
Gas Fill
778-11984C© 2013 25B-554
Push the primer five times.
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
While standing behind the machine, pivot the Blade
Control Handle against the upper handle and move
the blade depth control lever to its highest position.
Grasp the starter rope handle and pull with quick, full-
arm stroke. If the engine does not start after five pulls,
repeat steps 7 and 8.
7
9
8
10
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 25B554H711 Fast Start Guide

Type
Fast Start Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI