2. Troy-Bilt
  3. 25B554M711

Troy-Bilt 25B554M711 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 25B554M711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Rope Guide
Handle Knobs
A. Hold blade
control handle
against upper
handle.
B. Slowly pull starter
rope handle from
engine.
C. Slip starter rope
into the rope
guide.
D. Tighten wing
knob.
A. Pivot handle upward
into extended position.
Attach the rope guide
to the upper handle.
Do NOT tighten.
778-11984E© 2015 25B-554
Attach the cable to the
depth control lever
Attach the cable to the blade control handle.
A. Insert the stud into the upper handle.
Starter
Rope
Handle
Blade Control Handle
Blade Control Cable
Depth Control Lever
Depth
Control
Cable
Snap Fitting
A
B
B. Secure handle
by tightening
handle knobs.
B. Pivot the snap
fitting down
to secure it
in place.
A
C
D
A
B
B
A
D
C
B
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Oil Fill /
Dipstick
Primer
Gas Fill
778-11984E© 2015 25B-554
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
While standing behind the machine, pivot the Blade
Control Handle against the upper handle and move the
blade depth control lever to its highest position.
Grasp the starter rope handle and pull with quick, full-
arm stroke. If the engine does not start after five pulls,
repeat steps 10 and 11.
Push the primer three times.
3
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
Spark Plug Boot
7
10
9
8
11
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
/