Form No. 778-11918© 2010 12AI869
Use cable ties to secure cables to
lower handle.
Lift handle upward into extended position. A.
Tighten handle knobs. B.
A
B
B
B
Starter
Rope Handle
Blade Control Handle
Handle Knobs
Move hairpin clip to the inside hole A.
(i.e. the hole nearest the handle).
Insert carriage bolt and secure with B.
wing nut. Repeat on opposite side.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
A
A
B
C
Hold blade control handle against upper handle. A.
Slowly pull starter rope handle from engine and B.
slip starter rope into the rope guide.
Tighten rope guide wing knob.C.
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U