Troy-Bilt 12AVB2BV711 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12AVB2BV711
Type
Fast Start Guide

This manual is also suitable for

Troy-Bilt 12AVB2BV711 is a versatile and powerful lawnmower that can help you maintain a beautiful and healthy lawn. With its 12-inch cutting width and 3.5 HP Briggs & Stratton engine, it can easily handle even the toughest mowing jobs. The 6-position dual-lever height adjustment allows you to choose the perfect cutting height for your lawn, and the rear bag makes it easy to collect clippings and keep your yard looking neat and tidy.

Here are some of the features of the Troy-Bilt 12AVB2BV711 lawnmower:

  • 12-inch cutting width
  • 3.5 HP Briggs & Stratton engine
  • 6-position dual-lever height adjustment

Troy-Bilt 12AVB2BV711 is a versatile and powerful lawnmower that can help you maintain a beautiful and healthy lawn. With its 12-inch cutting width and 3.5 HP Briggs & Stratton engine, it can easily handle even the toughest mowing jobs. The 6-position dual-lever height adjustment allows you to choose the perfect cutting height for your lawn, and the rear bag makes it easy to collect clippings and keep your yard looking neat and tidy.

Here are some of the features of the Troy-Bilt 12AVB2BV711 lawnmower:

  • 12-inch cutting width
  • 3.5 HP Briggs & Stratton engine
  • 6-position dual-lever height adjustment
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
A. Remove the wing nuts and carriage bolts
securing the upper handle to the lower
handle.
778-12358© 2011 12AVB25
Pull upward on the
handle until the holes
in lower handle line up
with the holes
in the handle bracket.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Starter
Rope Handle
Blade Control Handle
Wing Nuts
T-Bolt
A
Pivot the upper handle
upward.
B. Remove T-bolts from
the handle brackets.
A
B
B
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
A
B
C
D
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
A
B
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
778-12358© 2012 12AVB25
Oil Fill /
Dipstick
Gas Fill
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
While standing behind the machine, pivot the Blade
Control Handle against the upper handle.
Grasp the starter rope handle and pull with quick,
full-arm stroke. If the engine does not start after three
pulls, wait a few minutes and repeat.
6
8
7
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 12AVB2BV711 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12AVB2BV711
Type
Fast Start Guide
This manual is also suitable for

Troy-Bilt 12AVB2BV711 is a versatile and powerful lawnmower that can help you maintain a beautiful and healthy lawn. With its 12-inch cutting width and 3.5 HP Briggs & Stratton engine, it can easily handle even the toughest mowing jobs. The 6-position dual-lever height adjustment allows you to choose the perfect cutting height for your lawn, and the rear bag makes it easy to collect clippings and keep your yard looking neat and tidy.

Here are some of the features of the Troy-Bilt 12AVB2BV711 lawnmower:

  • 12-inch cutting width
  • 3.5 HP Briggs & Stratton engine
  • 6-position dual-lever height adjustment
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents