Troy-Bilt 13WN77KS011 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

778-11998A
Attach the red cable to the positive (+) battery
terminal and attach the black cable to the
negative (–) battery terminal with the bolts and
hex nuts.
Position the red rubber boot over the
positive battery terminal.
Remove the shipping brace from the
discharge opening by grasping it
between your thumb and index finger
and rotating it clockwise.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Control
Ignition
Switch
Brake
Pedal
With the wheels of the tractor pointing straight 1.
forward, place the steering wheel
over the steering shaft.
Secure the steering wheel 2.
with the washer (cupped side
down) and hex bolt.
Push the steering wheel cap 3.
down until it “clicks” into place.
© 2011 13WN77K
Tools Required:
• /-inch wrench (or adjustable wrench)
• -inch wrench (or adjustable wrench)
• /-inch socket wrench
Remove the knob from the base of 1.
the seat.
Position the seat over the seat pan, 2.
with the two forward seat mount tabs
fitting into the provided grooves.
Slide the seat 3.
rearward and
align the center
mounting hole
in the seat with
the slot in the
seat pan and
secure the seat
with the knob.
Knob
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
778-11998A© 2011 13WN77K
Note: Steering Wheel not shown for clarity.
Fill fuel tank with clean, fresh gasoline.
Do not fill above the base of fuel tank neck.
Place PTO (Blade Engage) Lever in Off position.
Move the throttle control
into the Choke
position
Move Throttle to Fast position.
Insert the ignition key and turn it to the Start
position.
Release the key after the engine starts.
Place Shift Lever in N (neutral) position.
Fully depress the Brake Pedal.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Control
Ignition
Switch
Brake
Pedal
FAST
SLOW
FAST
SLOW
6
9
7
10
8
11
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
  • Page 1 1
  • Page 2 2

Troy-Bilt 13WN77KS011 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI