Commercial Electric HB1022-35 Installation guide

Brand: Commercial Electric

Model: HB1022-35

Type: Installation guide

This manual is also suitable for

HB1022-34

Commercial Electric HB1022-35 is an LED ceiling flush mount light fixture. It features a brushed nickel finish and a frosted glass shade. The fixture uses 15-watt LED bulbs, which are included, and provides 900 lumens of brightness. The HB1022-35 is dimmable, allowing you to customize the light output to your desired level. It is also ENERGY STAR ® listed, meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This fixture is ideal for use in kitchens, hallways, bedrooms, and other areas of your home where you need bright, energy-efficient lighting.

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. – 6 p.m., EST, Monday – Friday

1-877-527-0313

HOMEDEPOT.COM

USE AND CARE GUIDE

____________________________________

LED CEILING FLUSH MOUNT

THANK YOU

We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED

ceiling flush mount. We strive to continually create quality products designed to enhance your home. Visit us online to

see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!

Item: 1000053226 Model: HB1022-34 (Brushed Nickel)

Item: 1000053218 Model: HB1022-35 (Satin Bronze)

 Before starting installation of this fixture or

removal of a previous fixture, disconnect

the power by turning off the circuit breaker

or by removing the fuse at the fuse box.

 Consult a qualified electrician if you have

any electrical questions or need to replace

the driver.

 If you have any non-electrical questions

about this fixture, please contact our

Customer Service Team at

1-877-527-0313 or HOMEDEPOT.COM.

WARNING: Disconnect the power prior to

removing or installing a light fixture.

Table of Contents

Safety Information

Warranty

WHAT IS COVERED

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship

for a period of five (5) years from date of purchase. This warranty applies only to the original

consumer purchaser and only to products used in normal use and service. If this product is found to

be defective, the manufacturer‟s only obligation, and your exclusive remedy, is the repair or

replacement of the product at the manufacturer‟s discretion, provided that the product has not been

damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up,

or used in any way not in accordance with the instructions supplied with the product. This warranty

shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or

weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether expressed or

implied, of fitness for a particular purpose, other than the warranty contained herein. The

manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor/expense costs involved in the

replacement or repair of said product.

Contact the Customer Service Team at 1-877-527-0313 or visit

www.homedepot.com/commercialelectric.

Operation 7

Care and Cleaning 7

Exterior Maintenance 7

Interior Maintenance 7

Driver Replacement 7

Dimming 8

Recommended Dimmers 8

FCC Notice 8

Troubleshooting 8

Table of Contents 2

Safety Information 2

Warranty 2

Pre-Installation 3

Planning the Installation 3

Tools 3

Hardware 3

Package Contents 4

Installation 5

Pre-Installation

PLANNING THE INSTALLATION

Read all instructions before assembly and installation. Before starting installation of the fixture or

removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing

the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive

surface such as carpet or cardboard.

NOTE: Keep your receipt and these instructions

for Proof of Purchase.

TOOLS REQUIRED

HARDWARE REQUIRED

NOTE: Hardware not shown to actual size.

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Phillips

Screwdriver

Wire

Cutter

Wire

Stripper

Flathead

Screwdriver

Ladder

Safety

Goggles

Electrical

Tape

Part

Description

Quantity

Wire Nut

Bracket Mounting Screw

Fixture Mounting Screw

Mounting Bracket

CCBB

Pre-Installation (continued)

PACKAGE CONTENTS

Part

Description

Quantity

Fixture Pan

Glass Shade

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Mounting the hardware

 Thread the bracket mounting screws (BB)

through the mounting bracket (DD) and

into the outlet box.

 Thread the fixture mounting screws (CC)

so that they extend approximately 1/2 in.

below the ceiling.

Connecting the wires

 Pull the power supply wires out from the

outlet box.

 Attach the black supply wire to the black

fixture wire using wire nuts (AA).

 Attach the white supply wire to the white

fixture wire using wire nuts (AA).

 Connect the fixture ground wire and the

supply ground wire together using a wire

nut (AA).

 Wrap all wire connections with electrical

tape for a more secure connection.

Installation

NOTE: If you have electrical questions consult

your local electrical code for approved

grounding methods.

Securing the fixture pan

 Carefully tuck all the wires and wire

connections into the outlet box.

 Place the fixture pan (A) over the outlet

box and feed the fixture mounting screws

(CC) through the keyhole slots.

 Rotate the fixture pan (A) so that the

fixture mounting screws (CC) slide into

the narrow ends of the keyhole slots.

 Tighten the fixture mounting screws (CC)

so that the fixture pan (A) is secured flush

against the ceiling.

Assembling the fixture

 Line the glass shade (B) up with the

bumps on the inner part of the fixture pan

(A).

 Twist the glass shade (B) until it is secure.

Installation (continued)

Bottom

View

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Operation

 Turn on power at the circuit breaker or fuse box.

 Turn the light switch on to activate the fixture.

Care and Cleaning

EXTERIOR MAINTENANCE

 Use a dry or slightly dampened clean

cloth and wipe the surface of the fixture.

INTERIOR MAINTENANCE

 Disconnect power to the fixture by turning

off the circuit breaker or by removing the

fuse at the fuse box.

 Use a dry or slightly dampened clean

cloth to wipe the interior surface of the

fixture.

Driver Replacement

This product is ENERGY STAR ® listed.

The driver can be replaced without having

to cut wires. Please contact a qualified

electrician if driver replacement is needed.

NOTE: Do not use any cleaners with chemicals,

solvents, or harsh abrasives. Use only a dry

soft cloth to dust or wipe carefully.

Class 2 Power Supply | Dry or Damp Location Only

CAUTION

DISCONNECT LINE VOLTAGE BEFORE INSTALLING

OR REPLACING. CASE MUST BE GROUNDED.

VEL19090120HDA-1

In: 23 W, 0.23 A

Out: 15-21 V, 900 mA

PF: >0.90

CONSTANT CURRENT

Dimmable LED Driver

120V 60Hz

RoHS

E339538

Santa Fe Springs, CA

www.espentech.com

V2 Toll Free 1-866-933-7736 Made in China

W Red

B Yel

N +

L –

Dimming

Although this product is compatible with most common residential type dimmers, dimming

performance depends on dimmer, dimmer setting (for dimmers with brightness range adjustments),

wiring method, and the number of LED modules. For best results, set dimmer position at maximum

before adjusting to a lower light level.

RECOMMENDED DIMMERS

 Leviton Decora – 6631, IPI06

 Lutron Skylark – S-600

 Lutron Diva – DVCL-153PDH

FCC Notice

NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. However, there is no guarantee

that interference can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interface by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the device and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting

Problem

Solution

The light will not turn on.

 Make sure the power supply is on.

 Test or replace the switch.

 Check the wiring.

 Replace the driver.

The fuse blows or circuit breaker trips

when light is turned on.

 Check the wire connections.

NOTE: For optimal dimming

performance, load a minimum of four

LED modules.

HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

This page is intentionally left blank.

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. – 6 p.m., EST, Monday-Friday

1-877-527-0313

HOMEDEPOT.COM

Retain this manual for future use.

Page is loading ...

Commercial Electric HB1022-35 Installation guide

Brand: Commercial Electric

Model: HB1022-35

Type: Installation guide

This manual is also suitable for

HB1022-34

Download PDF

report

in other languages

français: Commercial Electric HB1022-35 Guide d'installation
español: Commercial Electric HB1022-35 Guía de instalación

Commercial Electric HB1022-35 Installation guide

This manual is also suitable for

Commercial Electric HB1022-35 Installation guide

in other languages

Related papers

Other documents