Kichler Lighting 45706PNLED User manual

Brand
Kichler Lighting
Model
45706PNLED
Type
User manual

Kichler Lighting 45706PNLED is a versatile LED fixture compatible with most standard incandescent dimmers, LED dimmers, and electronic low voltage dimmers. For optimal performance, an electronic low voltage dimmer should be used. It is easy to install and can be mounted up, down or horizontal. This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications.

Kichler Lighting 45706PNLED is a versatile LED fixture compatible with most standard incandescent dimmers, LED dimmers, and electronic low voltage dimmers. For optimal performance, an electronic low voltage dimmer should be used. It is easy to install and can be mounted up, down or horizontal. This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications.

We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
IS-45706LED-US
FCC Information:
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
interference that may cause undesired operaon.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. However,
there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to
radio or television recepon, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
DIMMING: This LED xture is compable with most standard
incandescent dimmers, LED dimmers, and electronic low voltage
dimmers. For opmal performance, an electronic low voltage
dimmer should be used.
CLEANING: Always be certain that electric current is turned o
before cleaning.
• Only a so damp cloth should be used. Harsh cleaning products
may damage the nish.
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Instrucons:
1) Remove (4) Mounng Screws[G].
2) Slide mounng plate[A] out of xture canopy[E].
3) Aach the mounng plate to the outlet box[C] with
supplied strap mounng screws[B].
4) Grounding instrucons: (See Illus. I or II)
a. On xtures where mounng plate is provided with a
hole and two raised dimples. Wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b. On xtures where a cupped washer is provided.
Put ground wire from outlet box under cupped
washer and green ground screw and thread screw
into hole inmounng strap.
Fixture Diagram
Parts List
[A] Mounting
Plate
[B] Strap
Mounting
Screws
[C] Outlet Box
[D] Wire
Connections
[E] Canopy
[F] Glass
[G] Mounting
Screws
[H] Decorative
Studs
[I] Glass Bracket
Cauons
If xture is provided with ground wire. Connect xture
ground wire to outlet box ground wire with wire con-
nector, aer following the above steps. Never connect
ground wire to black or white power supply wires.
5) Make wire connecons. Reference chart below for correct
connecons and wire accordingly.
5) Fixture can be mounted up, down or horizontal.
Determine which orientaon and place xture up to
mounng plate. Carefully push wire connecons[D]
inside mounng plate and canopy making sure all
connecons remain secure and wires do not get pinched.
6) Insert and ghten mounng screws to secure xture to
wall.
7) Install the glass[F] into the main xture.
8) Place the glass bracket[I] over the glass and using the
two (2) decorave studded knobs[H]; secure the bracket
in place.
A
C
D
B
H
G
E
F
I
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3

Kichler Lighting 45706PNLED User manual

Brand
Kichler Lighting
Model
45706PNLED
Type
User manual

Kichler Lighting 45706PNLED is a versatile LED fixture compatible with most standard incandescent dimmers, LED dimmers, and electronic low voltage dimmers. For optimal performance, an electronic low voltage dimmer should be used. It is easy to install and can be mounted up, down or horizontal. This fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents