Commercial Electric HB1022-34 Installation guide

Type
Installation guide

This manual is also suitable for

Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. 6 p.m., EST, Monday Friday
1-877-527-0313
HOMEDEPOT.COM
USE AND CARE GUIDE
____________________________________
LED CEILING FLUSH MOUNT
THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED
ceiling flush mount. We strive to continually create quality products designed to enhance your home. Visit us online to
see our full line of products available for your home improvement needs. Thank you for choosing Commercial Electric!
Item: 1000053226 Model: HB1022-34 (Brushed Nickel)
Item: 1000053218 Model: HB1022-35 (Satin Bronze)
Before starting installation of this fixture or
removal of a previous fixture, disconnect
the power by turning off the circuit breaker
or by removing the fuse at the fuse box.
Consult a qualified electrician if you have
any electrical questions or need to replace
the driver.
If you have any non-electrical questions
about this fixture, please contact our
Customer Service Team at
1-877-527-0313 or HOMEDEPOT.COM.
WARNING: Disconnect the power prior to
removing or installing a light fixture.
Table of Contents
Safety Information
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship
for a period of five (5) years from date of purchase. This warranty applies only to the original
consumer purchaser and only to products used in normal use and service. If this product is found to
be defective, the manufacturer‟s only obligation, and your exclusive remedy, is the repair or
replacement of the product at the manufacturer‟s discretion, provided that the product has not been
damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up,
or used in any way not in accordance with the instructions supplied with the product. This warranty
shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product, such as surface and/or
weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether expressed or
implied, of fitness for a particular purpose, other than the warranty contained herein. The
manufacturer specifically disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor/expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit
www.homedepot.com/commercialelectric.
2
Operation 7
Care and Cleaning 7
Exterior Maintenance 7
Interior Maintenance 7
Driver Replacement 7
Dimming 8
Recommended Dimmers 8
FCC Notice 8
Troubleshooting 8
Table of Contents 2
Safety Information 2
Warranty 2
Pre-Installation 3
Planning the Installation 3
Tools 3
Hardware 3
Package Contents 4
Installation 5
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting installation of the fixture or
removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing
the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
NOTE: Keep your receipt and these instructions
for Proof of Purchase.
TOOLS REQUIRED
HARDWARE REQUIRED
NOTE: Hardware not shown to actual size.
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
3
Phillips
Screwdriver
Wire
Cutter
Wire
Stripper
Flathead
Screwdriver
Ladder
Safety
Goggles
Electrical
Tape
Part
Description
Quantity
AA
Wire Nut
3
BB
Bracket Mounting Screw
2
CC
Fixture Mounting Screw
2
DD
Mounting Bracket
1
CCBB
AA
DD
Pre-Installation (continued)
PACKAGE CONTENTS
4
Part
Description
Quantity
A
Fixture Pan
1
B
Glass Shade
1
A
B
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
1
Mounting the hardware
Thread the bracket mounting screws (BB)
through the mounting bracket (DD) and
into the outlet box.
Thread the fixture mounting screws (CC)
so that they extend approximately 1/2 in.
below the ceiling.
2
Connecting the wires
Pull the power supply wires out from the
outlet box.
Attach the black supply wire to the black
fixture wire using wire nuts (AA).
Attach the white supply wire to the white
fixture wire using wire nuts (AA).
Connect the fixture ground wire and the
supply ground wire together using a wire
nut (AA).
Wrap all wire connections with electrical
tape for a more secure connection.
Installation
5
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
BB
CC
DD
AA
CC
A
3
Securing the fixture pan
Carefully tuck all the wires and wire
connections into the outlet box.
Place the fixture pan (A) over the outlet
box and feed the fixture mounting screws
(CC) through the keyhole slots.
Rotate the fixture pan (A) so that the
fixture mounting screws (CC) slide into
the narrow ends of the keyhole slots.
Tighten the fixture mounting screws (CC)
so that the fixture pan (A) is secured flush
against the ceiling.
4
Assembling the fixture
Line the glass shade (B) up with the
bumps on the inner part of the fixture pan
(A).
Twist the glass shade (B) until it is secure.
Installation (continued)
6
Bottom
View
A
CC
A
CC
A
B
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Operation
Turn on power at the circuit breaker or fuse box.
Turn the light switch on to activate the fixture.
Care and Cleaning
EXTERIOR MAINTENANCE
Use a dry or slightly dampened clean
cloth and wipe the surface of the fixture.
INTERIOR MAINTENANCE
Disconnect power to the fixture by turning
off the circuit breaker or by removing the
fuse at the fuse box.
Use a dry or slightly dampened clean
cloth to wipe the interior surface of the
fixture.
Driver Replacement
This product is ENERGY STAR ® listed.
The driver can be replaced without having
to cut wires. Please contact a qualified
electrician if driver replacement is needed.
7
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully.
Class 2 Power Supply | Dry or Damp Location Only
CAUTION
DISCONNECT LINE VOLTAGE BEFORE INSTALLING
OR REPLACING. CASE MUST BE GROUNDED.
VEL19090120HDA-1
In: 23 W, 0.23 A
Out: 15-21 V, 900 mA
PF: >0.90
CONSTANT CURRENT
Dimmable LED Driver
120V 60Hz
RoHS
E339538
Santa Fe Springs, CA
www.espentech.com
V2 Toll Free 1-866-933-7736 Made in China
W Red
B Yel
N +
L
Dimming
Although this product is compatible with most common residential type dimmers, dimming
performance depends on dimmer, dimmer setting (for dimmers with brightness range adjustments),
wiring method, and the number of LED modules. For best results, set dimmer position at maximum
before adjusting to a lower light level.
RECOMMENDED DIMMERS
Leviton Decora 6631, IPI06
Lutron Skylark S-600
Lutron Diva DVCL-153PDH
FCC Notice
NOTICE: This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee
that interference can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interface by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Troubleshooting
8
Problem
Solution
The light will not turn on.
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
Replace the driver.
The fuse blows or circuit breaker trips
when light is turned on.
Check the wire connections.
NOTE: For optimal dimming
performance, load a minimum of four
LED modules.
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
This page is intentionally left blank.
9
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. 6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Commercial Electric HB1022-34 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI