i3 Technical Support: 1.877.877.7241 Rev. 140212
5-series Chassis (SRX-Pro P Series) - Wall mounting instructions
Chassis dimensions:
43.2 cm x 37.5 cm x 15.56 cm (17”x14 ¾” x 6⅛”)
Minimum unit weight - 11.4 kg (25 lb).
i3’s wall/rack-mount chassis is an innovative All-In-One model designed
to expedite new installations with the simplicity of the built-in PoE
(Power over Ethernet) switch.
This chassis line is engineered to meet the current market demand for
simplicity and added value. Depending on the installation requirements,
the 5-Series chassis can be wall-mounted, especially in locations where
space is limited or rack-mounted in a server room. The 5-series chassis
are used for both hybrid and network video recorder models.
1. Locate two (2) wall-mount bracket pieces and eight (8) black screws in the molded foam insert inside the chassis shipping box.
2. Attach the first bracket piece to the bottom of
the side chassis panel with four (4) black screws
provided (see Image 3).
3. Attach the second bracket piece to the bottom
of the opposite side chassis panel with the
remaining four (4) black screws provided
(see Image 4).
Image 2. Wallmount Bracket x2
Image 1. 5-series chassis, with wallmount
brackets attached, side view
Image 3. Attach the first bracket piece
Image 4. Attach the second bracket piece
Bracket Assembly
i3 Technical Support: 1.877.877.7241 Rev. 140212
Mounting Instructions
CAUTION: To reduce the risk of electrical shock, a trained service technician
must disconnect TWO (2) power supply cords before servicing the system.
Unit door. This side DOWN.
Power and peripheral cables. This side UP
1. Use four (4) screws of the appropriate size (not provided)
to mount the DVR/NVR onto the wall. Four red arrow in
the Image 5 indicate the screw openings in the wall mount
brackets to be used for wall mounting.
2. Mount the DVR/NVR with the unit door facing DOWN.
The power and peripheral cables must face UP. See Image 5.
3. Alternatively, mount with the unit door facing sideways.
See Image 6.
4. NEVER mount with the unit door facing upwards and the
power/peripheral cables facing downwards. See Image 7.
IMPORTANT:
When mounting on the wall, mount directly onto the surface that can provide enough support for the DVR/NVR
unit to ensure secure and safe installation. Average unit weight - 11.7 kg (25.8 lb).
Image 5. Mount the unit with the door facing DOWN and the cables
facing UP. Red arrows indicate the position of mounting screws.
Unit door.
Power and peripheral cables.
Image 7. Do NOT mount with the unit door facing upwards and the
power/peripheral cables facing down.
Recommended Mounting Method
Other Acceptable Mounting Methods
Prohibited Mounting Method
Unit door.
Power and peripheral cables.
Unit door.
Image 6. You may mount the unit with the door facing sideways.
/
