Sunricher SR-2422K8-RGBW-G1-S2 User manual

Brand: Sunricher

Model: SR-2422K8-RGBW-G1-S2

Type: User manual

D1 D2

DALI INPUT

Scene

Push Button RGBW DT8 DALI Controller 09.2402K8WGS.04767

Click to switch on group.

11 mm

Function introduction

Important: Read All Instructions Prior to Installation

Front side

Back side

Output DALI signal

Operation Current 4mA

Operating temperature 0-40°C

Relative humidity 8% to 80%

Dimensions 71.2x71.2x13.6mm

Product Data

Power Supply Supply By DALI Bus

Click to switch off group.

Click to adjust color temperature

to the warmest. Press and hold

down to get warmer and warmer

white

Click to adjust R, G and B

channels from 100% to 0%,

press and hold down to select

R/G/B color

D1 D2

DALI INPUT

Rotary Switch for Assigning

Group (Total 16 Groups)

DALI signal output

Wiring Diagram

DALI signal

DALI Bus

Press and hold down to turn

up brightness of group.

Press and hold down to turn

down brightness of group.

Scene Button 1, click to recall

predefined or saved Scene of

selected Group, press and hold

down to save scene to selected

Group

Scene Button 2, click to recall

predefined or saved Scene of

selected Group, press and hold

down to save scene to selected

Group

Scene

Rotary Switch for Assigning

Scene (Total 16 Scenes)

S1 S2

RGB

GV+

V-

OUTPUT

INPUT

AC Power

50/60Hz

12V/24V/36V

CV PSU

Conne ct with RGBW L ED Strip

V+ V+

R- R-

G- G-

B- B-

W- W-

Conne ct with RGBW L ED Strip

V+ V+

R- R-

G- G-

B- B-

W- W-

Conne ct with RGBW L ED Strip

V+ V+

R- R-

G- G-

B- B-

W- W-

DT8 DALI RGBW Dim mer

0-6 0 -9

LED O UTPUT

12- 36V DC

POW ER INPU T

V-

V+

R-

G-

B-

W-

DAL I SIGNA L

DT8 DALI RGBW Dim mer

0-6 0 -9

LED O UTPUT

12- 36V DC

POW ER INPU T

V-

V+

R-

G-

B-

W-

DAL I SIGNA L

DT8 DALI RGBW Dim mer

0-6 0 -9

LED O UTPUT

12- 36V DC

POW ER INPU T

V-

V+

R-

G-

B-

W-

DAL I SIGNA L

Mounting

The key part of this controller is a universal, standard switch element that can be integrated in numerous

frames by different manufactures as below list:

BEKER S1, B1, B3, B7 glass

GIRA Standard55, E2, Event, Esprit

JUNG A500, Aplus

MERTEN M-smart, M-Arc, M-Plan

1. This controller is a DALI DT8 push button control panel that enables smooth color adjustment of RGBW LED

lighting. It controls DALI DT8 devices and can be compatible with DALI masters that supports DT8 commands.

2. Do wiring according to connection diagram correctly.

3. Set starting Group number via rotary switch on the back: (0-15 selectable)

• This DALI push button controller enables dimming commands and DT8 commands to be sent to One Group of

devices on the DALI circuit by one Group of buttons. A rotary switch on the back is used to select Group you

would like to control and set the starting Group number, and total 16 Groups (0-15) can be selected.

• When the rotary switch arrow position is at 0, Group 1 of buttons controls all 16 Groups of devices through

broadcast.

• When the rotary switch arrow position is at X except 0 (1-15), Group 1 of buttons controls Group X-1 of

devices.

For example: Rotary switch arrow at 1, Group 1 of buttons controls Group 0 of devices. Rotary switch arrow at

15, Group 1 of buttons controls Group 14 of devices.

Please refer to the detailed Group setting table as follows:

• DO NOT installed with power applied to device.

• DO NOT expose the device to moisture.

Safety & Warnings

Rotary Switch

Position

DALI Group for

Group 1 ofButtons

Broadcast

Operation

4. Set starting Scene number via rotary switch on the back: (0-15 selectable)

• This DALI push button controller enables Scene selection commands for up to two Scenes to be sent to the

DALI circuit by two Scene buttons S1, S2. A rotary switch on the back is used to select Scenes you would like to

control and set the starting scene number, and total 16 Scenes (0-15) can be selected.

• When the rotary switch arrow position is at X (0-15), Scene button S1 controls Scene X, and S2 controls

Scene X+1.

For example: Rotary switch arrow at 0, button S1 controls Scene 0, and S2 controls Scene 1. Rotary switch

arrow at 15, button S1 controls Scene 15, and S2 controls Scene 0.

Please refer to the detailed Scene setting table as follows:

Rotary Switch

Position

Scene assigned

to S1

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Scene assigned

to S2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0

5. Save Scenes

Turn on the DALI panel →

Press and hold down button RGB to select a color→

Press and hold down button S1/S2 until the LED lights connected with DALI device flash, which indicates the

scene is saved successfully.

Note: The saved scenes will cover the predefined ones.

Sunricher SR-2422K8-RGBW-G1-S2 User manual

Sunricher SR-2422K8-RGBW-G1-S2 User manual

Sunricher SR-2422K8-RGBW-G1-S2 User manual

Related papers

Other documents