DALI Module with Momentary Switch 09.240GC.04318
Setting the starting
Group number
D1
Operation
• Standard DALI Master , control 4 DALI Addresses
• Comply to DALI standard protocol IEC60929 and in compliance with DALI products from
other international incorporation.
• With bus detective function, one channel DALI bus can install multiple dimming controllers.
• No external power supply which is provided by DALI bus. Consumption current is 4mA.
• Enable to select 4 different group addresses for controlling by encoding switch.
• Controlled by external switch, convenient and flexible, with small size, it can be easily placed into 86 X 86 mm
box.
Function introduction
Important: Read All Instructions Prior to Installation Wiring diagram
Dimensions 52x52x22.9mm
Product Data
• DO NOT install with power applied to device.
• DO NOT expose the device to moisture.
Safety & Warnings
Set starting number for DALI masters
1. Set the starting number “X” on the DALI controller (with 16 groups)
2. K1 control X group, K2 control X+1 group, K3 control X+2 group, K4 control X+3 group
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10)
(x1)
K1GND K4K3
K2
D2 D1D2 D1 NC
DALI signal input/output DALI signal input/output
Connect with 4xpush switch
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10 )
(x1)
K1GND K4K3
K2
D2 D1D2 D1 NC
K1 K2 K3 K4
V+ V+
1- V-
2- V-
3- V-
4- V-
V+ V-
AC Power
50/60Hz
L
N
G
V+
V-
OUTPUT
INPUT
12V/24V/36V
CV PSU
Single Color LED Strip
DALI Co ntrol ler
123
4
GND
0-6 0- 9
DALI Co ntrol ler
123
4
GND
0-6 0- 9
DALI Co ntrol ler
123
4
GND
0-6 0- 9
DALI Master/
DALI Master software
via computer
V+ V+
1- V-
2- V-
3- V-
4- V-
Single Color LED Strip
V+ V+
1- V-
2- V-
3- V-
4- V-
Single Color LED Strip
D2
Output Signal DALI signal
Power Supply Provided by DALI bus
Power consumption 4 mA
Operating temperature 0-40°C
Relative humidity 8% to 80%
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sunricher SR-2400TS User manual
-
-
-
-
-
-
-
-
-