Contec VPC-700 Reference guide

Reference Manual

CONTENTS

Business Computer

VPC-700 Series

Introduction .................................................................. 5

Safety Precautions .................................................... 11

Product Nomenclature and Function ............... 17

Hardware Setup ........................................................ 29

BIOS Set up ................................................................. 37

Driver DVD .................................................................. 62

Software RAID Setup ............................................... 66

Hardware RAID Setup ............................................. 85

Appendix ...................................................................... 99

Customer Support and Inquiry ......................... 109

-

2

-

Table of Contents

Introduction ....................................................................... 5

1. Related Manuals ...................................................................................................................................................... 6

2. About the Product .................................................................................................................................................. 7

3. Features ...................................................................................................................................................................... 8

4. Supported OS........................................................................................................................................................... 9

5. Included Items ...................................................................................................................................................... 10

Safety Precautions ........................................................... 11

1. Safety Information............................................................................................................................................... 12

2. Handling Precautions ......................................................................................................................................... 13

1. FCC PART 15 Class A Notice ...................................................................................................................... 15

2. CE EMC Directive Class A Incidental condition ................................................................................. 15

3. CCC EMC Class A Notice ............................................................................................................................ 15

4. Warning Text of Highland Demand ....................................................................................................... 15

3. Security Warning .................................................................................................................................................. 16

1. Information security risks ........................................................................................................................... 16

2. Security measures – e.g. ............................................................................................................................. 16

Product Nomenclature and Function ............................ 17

1. Nomenclature of Product Components ..................................................................................................... 18

2. Description of Product Components ........................................................................................................... 20

1. LED: POWER, ACCESS .................................................................................................................................. 20

2. Power Switch: POWER SW ......................................................................................................................... 20

3. Reset Switch: RESET SW .............................................................................................................................. 20

4. Removable Drive LED: POWER, ACCESS............................................................................................... 20

5. Serial Port Interface: SERIAL ...................................................................................................................... 21

6. Serial Port Interface: SERIAL 2, ................................................................................................................. 22

7. DVI-I Interface: DVI-I .................................................................................................................................... 23

8. DisplayPort Interface: Display port ......................................................................................................... 24

9. HDMI Interface: HDMI................................................................................................................................. 25

10. USB 3.0 Ports: USB3.0 .................................................................................................................................. 26

11. USB 2.0 Ports: USB2.0 .................................................................................................................................. 26

12. Giga bit-Ethernet: LAN ................................................................................................................................ 27

13. Audio Port Interface: AUDIO ..................................................................................................................... 28

14. Expansion Slot ................................................................................................................................................ 28

Hardware Setup ............................................................... 29

1. Before Using the Product for the First Time ............................................................................................. 30

2. Hardware Setup.................................................................................................................................................... 31

1. Installing Storage .......................................................................................................................................... 31

2. Expansion Board Installation Procedure .............................................................................................. 33

3. Installation Requirements .......................................................................................................................... 35

-

3

-

Table of Contents

BIOS Set up ....................................................................... 37

1. Introduction ........................................................................................................................................................... 38

1. Starting Setup ................................................................................................................................................. 38

2. Using Setup ..................................................................................................................................................... 39

3. Getting Help .................................................................................................................................................... 39

4. In Case of Problems ..................................................................................................................................... 39

2. Main Menu ............................................................................................................................................................. 40

1. Setup Items...................................................................................................................................................... 40

3. Main .......................................................................................................................................................................... 41

4. Advanced ................................................................................................................................................................ 42

1. Trusted Computing ....................................................................................................................................... 43

2. PCH-FW Configuration ............................................................................................................................... 44

3. Super IO Configuration............................................................................................................................... 45

4. H/W Monitor................................................................................................................................................... 47

5. CPU Configuration ........................................................................................................................................ 48

6. SATA Configuration ...................................................................................................................................... 49

7. CSM Configuration ....................................................................................................................................... 50

8. USB Configuration ........................................................................................................................................ 51

5. Chipset ..................................................................................................................................................................... 52

1. System Agent (SA) Configuration ........................................................................................................... 53

2. PCH-IO Configuration ................................................................................................................................. 54

6. Security .................................................................................................................................................................... 55

1. Secure Boot menu ........................................................................................................................................ 56

2. Key Management .......................................................................................................................................... 57

7. Boot Configuration ............................................................................................................................................. 58

8. Save & Exit ............................................................................................................................................................. 59

1. Boot Device Setting...................................................................................................................................... 60

2. Setting to Turn On Power (AT operation) with AC Power On ...................................................... 61

Driver DVD ........................................................................ 62

1. Outline ..................................................................................................................................................................... 63

2. Driver DVD Directory .......................................................................................................................................... 64

3. Various Drivers ...................................................................................................................................................... 65

4. Registry Update .................................................................................................................................................... 65

Software RAID Setup....................................................... 66

1. Outline ..................................................................................................................................................................... 67

2. Software RAID Setting in the BIOS ............................................................................................................... 68

3. Delete RAID Volume ........................................................................................................................................... 75

4. RAID Setup When Replacing the Storage (Only for Windows 10 BIOS) ........................................ 77

5. Software RAID Monitoring Tool ..................................................................................................................... 78

1. Rapid storage technology install ............................................................................................................ 78

2. Starting the rapid storage technology ................................................................................................. 78

3. Exiting the rapid storage technology .................................................................................................... 80

-

4

-

Table of Contents

4. Rebuild mirroring .......................................................................................................................................... 81

5. For the error .................................................................................................................................................... 82

6. Confirming the error log ............................................................................................................................ 83

7. RAID setup when replacing the storage (OS) .................................................................................... 84

Hardware RAID Setup ..................................................... 85

1. Outline ..................................................................................................................................................................... 86

2. Functional specification .................................................................................................................................... 87

1. Option mirror card specification ............................................................................................................. 87

2. Locations and settings of connectors and switch ............................................................................ 88

3. Switch setting ................................................................................................................................................. 89

4. LED status ......................................................................................................................................................... 90

3. Mirror Card ............................................................................................................................................................. 91

1. Operation flow ............................................................................................................................................... 91

2. For the error .................................................................................................................................................... 92

3. RAID setup when replacing the storage .............................................................................................. 93

4. Hot swap........................................................................................................................................................... 94

4. OS Recovery Setting ........................................................................................................................................... 95

5. FAQ and Troubleshooting ................................................................................................................................ 96

1. FAQ ..................................................................................................................................................................... 96

2. Troubleshooting............................................................................................................................................. 97

Appendix .......................................................................... 99

1. System Reference .............................................................................................................................................. 100

1. Specifications ................................................................................................................................................ 100

2. Physical Dimensions ......................................................................................................................................... 103

1. VPC-700 .......................................................................................................................................................... 103

3. Commodity Model ............................................................................................................................................ 104

4. Battery Disposal ................................................................................................................................................. 107

1. Battery Specification .................................................................................................................................. 107

2. Dispose of the Battery ............................................................................................................................... 108

Customer Support and Inquiry .................................... 109

1. Services .................................................................................................................................................................. 110

-

5

-

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

VPC-700 Series Reference Manual

-

6

-

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Following Manuals.

Name

Purpose

Contents

How to get

Product Guide

Must read this after

opening the package.

This lists the product

configuration and describes

the precautions.

Included in the package

(Printed matter)

Reference Manual

(This document)

Read this when

operating the product.

This describes the hardware

aspects such as functions

and settings.

Download from

the

Contec

website (PDF)

IPC Precaution List

Read this before

operating the product.

This describes the

precautions when using the

product.

Download from

the

Contec

website (PDF)

MICROSOFT SOFTWARE

LICENSE TERMS *1

Must read this after

opening the package.

This describes the rights and

conditions of user when

using Windows software.

Download from

the

Contec

website (PDF)

Windows Setup Manual

*1

Must read this after

opening the package.

This describes the Windows

Setup that is required when

using the product for the

first time.

Download from

the

Contec

website (PDF)

Windows Recovery

Manual *1

Must read this after

opening the package.

This describes the procedure

to restore the factory

settings using the recovery

disc, such as when the

Windows system is

damaged.

Download from

the

Contec

website (PDF)

*1 Reference for pre-installed models only.

 Download MICROSOFT SOFTWARE LICENSE TERMS

Download it from the following URL.

Download

https://www.contec.com/support/useterms/

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

VPC-700 Series Reference Manual

-

7

-

2. About the Product

This product is a high-performance embedded-type personal computer equipped with the 6th-

generation Intel ® Core ™ processor.

It has extension interfaces such as DVI-I, HDMI, DisplayPort, 1000BASE-T, USB 3.0, serial and Audio.

These Units are ideal for a wide range of embedded applications, such as control devices and

information terminals based on general-purpose PC OSes.

Embedded-type chipset and CPU have been adopted. The use of readily available parts ensures the

ease of the use of the product.

—

Introduction

—

VPC-700 Series Reference Manual

-

8

-

3. Features

 Compatible with Intel ® Core ™ processor series Skylake

The product is equipped with the 6th-generation Intel ® Core ™ processor and greatly realizes lower-power consumption while ensuring

fine performance of operation tasks and drawing. Adopting embedded-type CPU contributes to a stable supply.

 The compact size that can install at a small area

This product is a compact size PC of 264(W)×263(D)×112(H)mm that can install at a small area.

 Adopt removable storage

The product adopts front accessible 2.5-inch SATA storage, and also supports RAID function such as mirroring.

 Supports mirroring (RAID1)

Mirroring enables the construction of redundant systems.

[Hardware RAID]

Selecting the optional mirror card enables the construction of hardware mirroring. Hot-swapping is also supported.

[Software RAID]

Software mirroring can be constructed, but hot-swapping is not supported.

 Major types of peripherals are supported with rich

interfaces including

It has a variety of extended interface such as PCI Express (×16) x 1slot, DVI-I x 1, HDMI x 1, DisplayPort x 1, 1000BASE-T x 3, USB3.0 x 6,

USB2.0 x 2, serial (RS-232C/RS-422A/RS-485) x 1, Audio.

—

Introduction

—

VPC-700 Series Reference Manual

-

9

-

4. Supported OS

 Windows 10 IoT Enterprise 2016 LTSB 64bit (Japanese / English / Chinese / Korean)

 Windows 10 IoT Enterprise 2019 LTSC 64bit (Japanese / English / Chinese / Korean)

 Windows 10 IoT Enterprise 2019 LTSC 64bit with Microsoft Edge (Chromium)

(Japanese/English/Chinese/Korean)

 Windows 7 Professional for Embedded Systems SP1 32bit (Japanese / English)

 Windows 7 Professional for Embedded Systems SP1 64bit (Japanese / English)

—

Introduction

—

VPC-700 Series Reference Manual

-

10

-

5. Included Items

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

Product…1

AC cable...1

DVI-analog RGB

conversion adapter...1

Rubber Foot...4

Flat Screw for

HDD *1...8

Binding Screw for

Extension Board *1...2

CCC Compliant AC Cable

(250VAC, 3Ptype) *2…1

Hazardous Substances

Management *2...1

Product Guide...1

*1 The quantity varies depending on the product configuration.

*2 This is included when it is selected as a CCC support.

-

11

-

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

VPC-700 Series Reference Manual

-

12

-

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

Signal word used to indicate an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in death or serious injury.

CAUTION

Signal word used to indicate a potentially hazardous situation which,

if not avoided, could result in minor or moderate injury.

—

Safety Precautions

—

VPC-700 Series Reference Manual

-

13

-

2. Handling Precautions

WARNING

 Always check that the power supply is turned off before connecting or disconnecting AC

power cable.

 Do not use the product in locations exposed to a flammable or corrosive gas. It may cause

explosion, fire, electrical shock, or malfunction.

 Do not touch metal parts (edge connector) with your hands. Otherwise, the product may

malfunction, or cause failure.

 When transporting the product, pack it in the same condition as delivered from the Contec or

in equal packing condition to avoid applying shock, vibration, or static electricity directly to

the product.

 Do not modify the product.

 Always turn off the power before inserting or removing the boards or cables.

 This product is not intended for use in aerospace, space, nuclear power, medical equipment,

or other applications that require a very high level of reliability. Do not use the product in

such applications.

 If using this product in applications where safety is critical such as in railways, automotive, or

disaster prevention or security systems, please contact your retailer.

 Do not attempt to replace the battery as inappropriate battery replacement poses a risk of

explosion.

 For battery replacement, contact your retailer as it must be performed as a process of repair.

 When disposing of a used battery, follow the disposal procedures stipulated under the

relevant laws and municipal ordinances. For details on replacing the battery, refer to the

appendix.

 This product is connected to a socket-outlet with earthing connection by means of a power

cord.

 This product is not suitable for use in locations where children are likely to be present.

CAUTION

 Do not use or store this product in a location exposed to high or low temperature that

exceeds range of specification or susceptible to rapid temperature changes.

e.g. - Exposure to direct sun - In the vicinity of a heat source

 Do not use this product in extremely humid or dusty locations. It is extremely dangerous to

use this product with its interior penetrated by water or any other fluid or conductive dust. If

this product must be used in such an environment, install it on a dust-proof control panel, for

example.

—

Safety Precautions

—

VPC-700 Series Reference Manual

-

14

-

 Avoid using or storing the product in locations subject to shock or vibration that exceeds

range of specification.

 Do not use this product in the vicinity of devices that generate strong magnetic force or

noise. Such products will cause this product to malfunction.

 Do not use or store this product in the presence of chemicals.

 To clean this product, wipe it gently with a soft cloth dampened with either water or mild

detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent

pealing or discoloration of the paint.

 CONTEC does not provide any guarantee for the integrity of data on storage.

 Always disconnect the power cable from the receptacle before mounting or removing the

expansion board, before connecting or disconnecting any connector.

 To prevent corruption of files, always shutdown the OS before turning off this product.

 CONTEC reserves the right to refuse to service a product modified by the user.

 In the event of failure or abnormality (foul smells or excessive heat generation), unplug the

power cord immediately and contact your retailer.

 Use the AC power cable that matches the power supply voltage and outlet plug that you are

using. (The supplied cable is designed for use with a 125 VAC power supply.)

 Always turn off the power before replacing storage. It is not hot-swappable. Removing the

storage during the operation may results in system damages.

 Continuously operating the product may decrease the service life of the hard disk drive, so

use the standby mode.

 Component Life:

- Power --------------The assumed life is about 4 years when the product is continuously

operated at a temperature of 40°C. However, it may be shortened due to

operating temperature.

- Battery--------------The internal calendar clock and CMOS RAM are backed by a Lithium

primary battery. The backup time at a temperature of 25°C with the

power disconnected is 7 years.

* Replacement of expendables is handled as a repair (there will be a charge).

 To connect with peripherals, use a grounded, shielded cable.

 Do not use a UPS (Uninterruptible Power Supply) that generates square waves. Connecting

the product to this type of UPS may lead to product failure.

 If you use this product in a noisy environment, attach a ferrite core to each cable (LAN, USB,

serial, DVI-I, HDMI, DisplayPort, and Line output) to stabilize the operation.

—

Safety Precautions

—

VPC-700 Series Reference Manual

-

15

-

1. FCC PART 15 Class A Notice

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

2. CE EMC Directive Class A Incidental condition

Regarding LAN cable connection, please use the STP cable (Category 5e more over) so that suite this standard.

3. CCC EMC Class A Notice

此为A级产品，在生活环境中，该产品可能会造成无綫电干扰。

在这种情况下，可能需要用户对干扰采取切实可行的措施。

Note: This is the incidental clause applies to CCC, or China Compulsory Certification.

4. Warning Text of Highland Demand

警告标识

Warning Sign

警告声明

Warning statement

仅适用于海拔2000m以下地区安全使用

Used only at altitudes not more than 2000m above sea level.

Note: This is the incidental clause applies to CCC, or China Compulsory Certification.

CAUTION

The object of the standard of this product become only a main body.

—

Safety Precautions

—

VPC-700 Series Reference Manual

-

16

-

3. Security Warning

When connecting to the network, be aware of security-related problems. See the examples of

Security measures below and set up the product properly along with the network devices.

1. Information security risks

 Unauthorized access from the outside through a network could cause the system halt, data

damage, or exposure to malware. *1

 Invaded and used as a stepping stone, a device might attack the others through networks. (a

victim becomes an assailant)

 Information might leak without realizing due to the connection to the network.

 Secondary damages such as harmful rumors, liability in damages, social credibility fall, and

opportunity loss are expected led by the troubles described above.

*1: Malware (Malicious Software) is software that brings harm to a computer system and performs

unintended operations.

2. Security measures – e.g.

 Do not keep using the default password. (Refer to the product manual for the password

setting).

 Set a strong password.

Combined with upper and lowercase letters, and numbers so that it cannot be easily

analogized by others.

 Change the password periodically.

 Disable unnecessary network services and functions.

 Restrict access to the network with network devices. *2

 Restrict ports to be released on the network with network devices. *2

 Create a closed network connection using such as dedicated network or VPN*3

*2: Inquire for setting procedure to manufacturers.

*3: VPN (Virtual Private Network) a secured network that wards off unauthorized access by

protecting the communication path with authentication and encryption.

Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole

that are endlessly found day and night.

Please understand that risks are always involved with the Internet connection, and we strongly

recommend a user should constantly update information security measures.

-

17

-

Product Nomenclature

and Function

This section describes product component names and their

functions, pin assignment of each connector.

—

Product Nomenclature and Function

—

VPC-700 Series Reference Manual

-

18

-

1. Nomenclature of Product Components

Component names of the product are shown in the figure below.

 VPC-700-Series

Name

Function

POWER LED

Power ON display LED

ACCESS LED

SATA device access display LED

POWER-SW

Power switch

RESET SW

Reset switch

DVD

Slim super multi drive

Drive 0

SATA III 2.5 inch removable drive

Drive 1

DVD ACCESS LED

DVD access display LED

DVD EJECT SW

Eject switch

Removable drive POWER LED

Drive connection display LED

Removable drive ACCESS LED

Drive access display LED

SERIAL

RS-232C/422/485 (9pin D-SUB connector (male)) 1 port

SERIAL 2, 3 *1

RS-232C (9pin D-SUB connector (male)) 1 port

DVI-I

DVI-I 1 port

Display port

Display Port Connector 1 port

HDMI

HDMI (19pin HDMI TYPE-A connector) 1 port

USB3.0

USB3.0 (TYPE-A connector) 6 port (Rear)

USB2.0

USB2.0 (TYPE-A connector) 2 port (Front)

—

Product Nomenclature and Function

—

VPC-700 Series Reference Manual

-

19

-

Name

Function

LAN

1000BASE-T/100BASE-TX/10BASE-T (RJ-45 connector) 3 port

AUDIO

Line in, Line out, Mic in (3.5φ stereo minijack) 1 port (Rear)

Line out, Mic in (Front)

AC INLET

AC100-240V Power input connector

*1 This is available when selecting COM in BTO model. 2 expansion slots are occupied when selecting

COM2, 3.

—

Product Nomenclature and Function

—

VPC-700 Series Reference Manual

-

20

-

2. Description of Product Components

Components such as connectors, switches are described.

1. LED: POWER, ACCESS

Two LED is equipped with the front of the product.

LED name

State (Display color)

Display content

POWER LED

Off

Power of this product Indicates that the OFF state.

ON (Blue)

Power of this product Indicates that the ON state.

ACCESS LED

ON (Orange)

It indicates that the SATA device is an access state.

2. Power Switch: POWER SW

This is the power switch.

3. Reset Switch: RESET SW

This product has a reset switch.

4. Removable Drive LED: POWER, ACCESS

There are four LEDs corresponding to Drive 0 and Drive 1 on the front of the removable drives.

LED name

State (Display color)

Display content

POWER LED

Off

This indicates the drive is unconnected.

ON (Blue)

This indicates the drive is being connected.

ACCESS LED

ON (White)

This indicates the drive is being accessed.

Page is loading ...

Contec VPC-700 Reference guide

Related papers

Other documents