EnviroLite EVT101227A-35 Installation guide

Type
Installation guide

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

  • Easy to install
  • Energy Efficient LED Lighting
  • ENERGY STAR® qualified

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

  • Easy to install
  • Energy Efficient LED Lighting
  • ENERGY STAR® qualified
INSTRUCTIONS MANUAL
FOUR LIGHT LED FIXED TRACK
Page 1
MODEL EVT101227A
Page 2
Thank you for purchasing this EnviroLite
Four Light LED Fixed Track. This product has been
manufactured with the highest standards of safety and quality.
FEATURES:
Please call our Customer Service Team at 1-855-573-6156.
QUESTIONS, PROBLEMS, MISSING PARTS:
1. Easy to install.
2. Energy Efficient LED Lighting
3. ENERGY STAR® qualified
CAUTION:
1. Before starting installation of this fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse box.
2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you
have any non-electrical questions about this fixture, please call our Customer Service
Team at 1-855-573-6156.
3. KEEP your receipt and these Instructions for Proof of Purchase.
TOOLS REQUIRED FOR INSTALLATION (not included):
Safety
goggles
Wire
strippers
Phillips
screwdriver
Electrical
tape
Wire
cutters
Flathead
screwdriver
Page 3
INSTALLATION INSTRUCTIONS:
1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting
Screws (#6). (Fig. 2)
2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the Straight Bar
(#7). (Fig. 3)
3. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket (#4) to the
Outlet Box (#3), using the Bracket Mounting Screws (#5). (Fig. 4)
4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the final
orientation of the Fixture itself. Tighten both Center Screws (#17). (Fig. 4)
5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply Wire (#15) to
the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture Ground Wire (#12) and the
Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap all wire connections with electrical
tape for a more secure connection. (Fig. 5) Note: If you have electrical questions, consult your local
electrical code for approved grounding methods.
6. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the Fixture
over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy Mounting Holes align
with the Mounting Holes of the Swivel Bar (#9). Thread the Canopy Mounting Screws (#6) into the
Canopy Mounting Holes to secure the Canopy (#8) onto the Swivel Bar and flush against the ceiling. (Fig.
6)
7. Proceed back to the Assembly Instructions.
8. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to
activate the fixture.
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
3 ea Wire
Nuts (#14)
2 ea Bracket Mounting
Screws (#5)
1 ea Mounting
Bracket (#4)
1 ea Fixture (#1)
Page 4
INSTALLATION:
3. Outlet Box
6. Canopy
Mounting
Screw
8. Canopy
6. Canopy
Mounting Screw
4. Mounting
Bracket
Fig. 2
17. Center
Screws
9. Swivel
Bar
Fig. 4
11. White Fixture Wire
12. Fixture
Ground Wire
13. Wire Nut
15. White Supply Wire
14. Black Supply Wire
16. Supply
Ground Wire
3. Outlet Box
10. Black Fixture Wire
8. Canopy
Fig. 5
Fig. 6
9. Swivel
Bar
5. Bracket
Mounting Screw
3. Outlet Box
Fig. 3
7. Straight
Bar
3. Outlet Box
Page 5
DIMMING:
Dimming performance may
depend on the dimmer, the
dimmer range adjustment setting
(for dimmers with brightness range
adjustments), the wiring method,
and/or the number of LED modules
installed onto the dimmer circuit.
For a complete list of compatible
dimmers, please go to
www.envirolite-LED.com and
search your products item
number.
LIGHT DISTRIBUTION DIAGRAM:
POWER
IN
TRIAC
DIMMER
WHITE
BLACK
BARE/
GREEN
WHITE
BLACK
BARE/
GREEN
FIXTURE
OUTPUT WIRE
LED DRIVER:
180 170 160 150 140
0 10 20 30 40
130
120
110
100
90
80
70
60
50
4,200
3,500
2,800
2,100
1,400
700
CD: 0
700
1,400
2,100
2,800
3,500
4,200
Constant Current LED Driver & Triac Dimmer
P/N:CDLPS600R27
Vin: 108-135VAC 60Hz
Iin: 0.4A Max
Vout: 30-43 VDC
Iout: 600mA C.C.
Max Pout: 25.8W
PF: > 0.90
CAUTION: Risk of Electric Shock,
Suitable for Damp Locations
Made in China
TC
DC OUTPUT
+ = RED
= BLACK
AC INPUT
L = BLACK
N = WHITE
Page 6
Problem Possible Cause Corrective Action
1. Power is off. 1. Make sure power supply is on.
2. Faulty switch. 2. Test or replace switch.
3. Faulty wire connection. 3. Check wiring.
4. LED driver has malfunctioned. 4. Replace LED driver.
Fuse blows or circuit
breaker trips when light is
turned on.
1. Crossed wires or power wire is
grounding out.
1. Check wire connections.
Light will not turn on.
TROUBLESHOOTING:
PRODUCT MAINTENANCE:
1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean
water, never a solvent) to wipe the surface of the fixture.
2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the
circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of
the fixture.
3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft
cloth to dust or wipe carefully.
EnviroLite
warrants this product to be free from defects in material and workmanship for
five years from the original date of purchase by the consumer. This warranty is limited to
the counter replacement at the time of purchase, with the original purchase receipt.
EnviroLite
will not be liable for the loss or damage of any kind, incidental or consequential
damages of any kind, whether based on warranty contract or negligence, and arising in
connection with the sale, use or repair of the product claimed to be defective. Some states
do not allow the exclusion or limitation of incidental or consequential damages so the above
limitation may not apply to you. This warranty gives you specific legal rights and you may
also have other rights, which vary from state to state. Misuse, accident, improper
installation or maintenance will also void the warranty.
FIVE-YEAR LIMITED WARRANTY
MANUAL DE INSTRUCCIONES
Page 7
RIEL FIJO CON CUATRO LUCES LED
MODELO EVT101227A
MODE D’INSTALLATION
Page 13
RAIL D’ÉCLAIRAGE À 4 LUMIÈRES DEL
MODÈLE EVT101227A
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

EnviroLite EVT101227A-35 Installation guide

Type
Installation guide

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

  • Easy to install
  • Energy Efficient LED Lighting
  • ENERGY STAR® qualified

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI