Hampton Bay HBTK601P-35 Operating instructions

Brand: Hampton Bay

Model: HBTK601P-35

Type: Operating instructions

Hampton Bay HBTK601P-35 is an exterior wall lantern with four adjustable track heads that can be rotated to direct light where you need it most. It's easy to install and comes with all the necessary hardware. The weather-resistant finish will hold up for years to come, even in harsh weather conditions.

This lantern is perfect for illuminating entryways, patios, and other outdoor areas. It provides ample light for safety and security, and the adjustable track heads allow you to customize the lighting to your specific needs.

Here are some of the features of the Hampton Bay HBTK601P-35:

Four adjustable track heads

Here are some of the features of the Hampton Bay HBTK601P-35:

Four adjustable track heads

Page 1

INSTRUCTIONS MANUAL

FOUR LIGHT FIXED TRACK

HOME DEPOT SKU 743-253 (UPC 046335946828)

Page 2

Thank you for purchasing this Hampton Bay exterior wall lantern. This

product has been manufactured with the highest standards of safety and

quality. The finish of this lantern is weather resistant but over time will

naturally weather and fade.

FEATURES:

1. Easy to install

2. 4 adjustable track heads

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer

Service Team at 1-877-527-0313 or visit www.homedepot.com. Please

reference your SKU (743-253) or UPC (046335946828).

Page 3

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the

fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY

ELECTRICAL QUESTIONS.If you have any non-electrical questions

about this fixture, please call our Customer Service Team at 1-877-527-

0313 or visit www.homedepot.com. Please reference your SKU (743-

253) or UPC (046335946828).

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not

included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

Page 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Install a GU10/50 Watt Light Bulb (#1) [four included] into the socket of

the each Lamp Head (#2) of the Fixture by inserting its pins into the large

holes of the socket and twisting it clockwise, as shown.

1 ea Fixture

4 ea GU10 / 50 W

Light Bulb (#1)

Page 5

Fig. 1

ASSEMBLY:

1. GU10/50 Watt

Light Bulbs

2. Lamp Heads

Page 6

1 ea Fixture

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

1. Remove the Canopy Mounting Screws (???) from the Mounting Bracket (#4). Keep the

Canopy Mounting Screws. Fig. 2 Thread the Fixture Mounting Screws (#7) into the provided

holes of the Mounting Bracket (#4) as shown. Thread the Hex Nuts (#6) onto the Fixture

Mounting Screws (#7), as shown. Do not tighten the Hex Nuts (#6) at this time.

2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the

Straight Bar (#7).

3. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket

(#4) to the Outlet Box (#3), using the Bracket Mounting Screws (#5). Fig. 3

4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the

final orientation of the Fixture itself. Tighten both Center Screws (#17). Fig. 4

5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply

Wire (#15) to the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture

Ground Wire (#12) and the Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap

all wire connections with electrical tape for a more secure connection. Fig. 5 Note: If you have

electrical questions, consult your local electrical code for approved grounding methods.

6. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the

Fixture over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy

3 ea Wire

Nuts (#13)

2 ea Bracket

Mounting Screws (#5)

1 ea Mounting

Bracket (#4)

Page 7

Mounting Holes align with the Mounting Holes of the Swivel Bar (???). Thread the Canopy

Mounting Screws into the Canopy Mounting Holes to secure the Canopy onto the Swivel Bar

and flush against the ceiling. Place the Canopy (#8) of the Fixture over the Outlet Box (#3)

and onto the Fixture Mounting Screws (#7), and adjust the Fixture Mounting Screws (#7) until

they protrude out from the Canopy (#8) 1/4". Remove the Canopy (#8) and secure the position

of the Fixture Mounting Screws (#7) by tightening the Hex Nuts (#6) against the Mounting

Bracket (#4). Place the Canopy (#8) back onto the Fixture Mounting Screws (#7), and secure it

into place using the Lock Nuts (#9) provided.

7. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch

on to activate the fixture.

Page 8

Fig. 2

Fig. 4

INSTALLATION:

8. Canopy

16. Supply

Ground Wire

3. Outlet Box

6. Canopy

Mounting

Screw

4. Mounting

Bracket

Fig. 3

5. Bracket

Mounting

Screw

7. Straight Bar

3. Outlet Box

9. Swivel

Bar

17. Center

Screws

9. Swivel

Bar

12. Fixture

Ground Wire

10. Black Fixture

Wire

11. White Fixture Wire

15. White Supply Wire

14. Black Supply Wire

13. Wire Nut

Fig. 5

Fig. 6

6. Canopy

Mounting

Screws

8. Canopy

3. Outlet

Box

Page 9

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water,

never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth

to dust or wipe carefully.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and

workmanship for a period of five (5) years from date of purchase. This warranty applies only to

the original consumer purchaser and only to products used in normal use and service. If this

product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is

the repair or replacement of of the product at the manufacturer’s discretion, provided that the

product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect

or mishandling. This warranty shall not apply to any product that is found to have been

improperly installed, set-up, or used in any way not in accordance with the instructions supplied

with the product. This warranty shall not apply to a failure of the product as a result of an

accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not

relating to faulty material or workmanship. This warranty shall not apply to the finish on any

portion of the product, such as surface and/or weathering, as this is considered normal wear and

tear. The manufacturer does not warrant and specially disclaims any warranty, whether

expressed or implied, of fitness for a particular purpose, other than the warranty contained

herein. The manufacturer specifically disclaims any liability and shall not be liable for any

consequential or incidental loss or damage, including but not limited to any labor/expense

costs involved in the replacement or repair of said product.

Possible Cause Corrective Action

Lights will not turn on. 1. Power is off. 1. Make sure power supply is on.

1. Bulb is burned out 1. Replace light bulb.

2. Faulty wire connection. 2. Check wiring.

3. Faulty switch. 3. Test or replace switch.

Fuse blows or circuit

breaker trips when light is

turned on.

1. Crossed wires or power wire is

grounding out.

1. Check wire connections.

Bulb will not turn on.

Page 10

MANUAL DE INSTRUCCIONES

RIEL FIJO CON CUATRO LUCES

HOME DEPOT SKU 743-253 (UPC 046335946828)

Page is loading ...

Page 18

MANUEL D’INSTALLATION

RAIL D’ÉCLAIRAGE À 4 LUMIÈRES

HOME DEPOT UGS N° 743-253 (UPC N° 046335946828)

Page is loading ...

Page 22

ASSEMBLAGE :

1. Lampes

GU10/50 watts

2. Projecteurs

Page is loading ...

Hampton Bay HBTK601P-35 Operating instructions

Brand: Hampton Bay

Model: HBTK601P-35

Type: Operating instructions

Here are some of the features of the Hampton Bay HBTK601P-35:

Four adjustable track heads

Download PDF

report

in other languages

français: Hampton Bay HBTK601P-35 Mode d'emploi
español: Hampton Bay HBTK601P-35 Instrucciones de operación

Hampton Bay HBTK601P-35 Operating instructions

Hampton Bay HBTK601P-35 Operating instructions

in other languages

Related papers

Other documents