EnviroLite EVT102027-35 Installation guide

Brand: EnviroLite

Model: EVT102027-35

Type: Installation guide

EnviroLite EVT102027-35 is a four-light LED fixed track that is easy to install and provides energy-efficient lighting. It is ENERGY STAR® qualified, which means that it meets the strict energy efficiency guidelines set by the U.S. Environmental Protection Agency.

This particular model comes with four decorative glass shades that can be twisted into place to secure them.

The track can be mounted to a ceiling using the included mounting bracket and screws.

It is also dimmable, so you can adjust the brightness of the light to suit your needs, which is especially useful in living rooms and bedrooms.

This particular model comes with four decorative glass shades that can be twisted into place to secure them.

The track can be mounted to a ceiling using the included mounting bracket and screws.

It is also dimmable, so you can adjust the brightness of the light to suit your needs, which is especially useful in living rooms and bedrooms.

INSTRUCTIONS MANUAL

FOUR LIGHT LED FIXED TRACK

Page 1

MODEL EVT1020

Page 2

Thank you for purchasing this EnviroLite



Four Light LED Fixed Track. This product has been

manufactured with the highest standards of safety and quality.

FEATURES:

Please call our Customer Service Team at 1-855-573-6156.

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

2. Energy Efficient LED Lighting

3. ENERGY STAR® qualified

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture, disconnect the

power by turning off the circuit breaker or by removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you

have any non-electrical questions about this fixture, please call our Customer Service

Team at 1-855-573-6156.

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION (not included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

ASSEMBLY INSTRUCTIONS:

Page 3

1 ea Fixture (#1)

1. Carefully unpack the fixture. Lay out all parts on a clean surface.

2. Before continuing Assembly, please proceed to the Installation Instructions.

3. Insert a Decorative Glass Shade (#2) into a Lamp Head and twist clockwise to secure it in

place. Repeat for the remaining Decorative Glass Shades (#2) and Lamp Heads.

4 ea Decorative Glass (#2)

ASSEMBLY:

Page 4

1. Fixture

Fig. 1

2. Decorative

Glass

Page 5

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

INSTALLATION INSTRUCTIONS:

3 ea Wire

Nuts (#14)

2 ea Bracket Mounting

Screws (#5)

1 ea Mounting

Bracket (#4)

1 ea Fixture (#1)

1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting

Screws (#6). (Fig. 2)

2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the Straight Bar

(#7). (Fig. 3)

3. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket (#4) to the

Outlet Box (#3), using the Bracket Mounting Screws (#5). (Fig. 4)

4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the final

orientation of the Fixture itself. Tighten both Center Screws (#17). (Fig. 4)

5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply Wire (#15) to

the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture Ground Wire (#12) and the

Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap all wire connections with electrical

tape for a more secure connection. (Fig. 5) Note: If you have electrical questions, consult your local

electrical code for approved grounding methods.

6. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the Fixture

over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy Mounting Holes align

with the Mounting Holes of the Swivel Bar (#9). Thread the Canopy Mounting Screws into the Canopy

Mounting Holes to secure the Canopy (#8) onto the Swivel Bar and flush against the ceiling. (Fig. 6)

7. Proceed back to the Assembly Instructions.

8. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to

activate the fixture.

Page 6

INSTALLATION:

11. White Fixture Wire

12. Fixture

Ground Wire

13. Wire Nut

15. White Supply Wire

14. Black Supply Wire

16. Supply

Ground Wire

3. Outlet Box

10. Black Fixture Wire

8. Canopy

6. Canopy

Mounting Screw

4. Mounting

Bracket

9. Swivel

Bar

5. Bracket

Mounting Screw

17. Center

Screws

9. Swivel

Bar

3. Outlet Box

6. Canopy

Mounting

Screw

8. Canopy

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

7. Straight

Bar

Page 7

-/+180

150

120

-150

-120

-90

-60

-30

906.61

1813.23

2719.84

3626.46

4533.07

DIMMING:

Dimming performance may

depend on the dimmer, the

dimmer range adjustment setting

(for dimmers with brightness range

adjustments), the wiring method,

and/or the number of LED modules

installed onto the dimmer circuit.

For a complete list of compatible

dimmers, please go to

www.dimmerlist.com/EVT1020.

LIGHT DISTRIBUTION DIAGRAM:

POWER

TRIAC

DIMMER

WHITE

BLACK

BARE/

GREEN

WHITE

BLACK

BARE/

GREEN

FIXTURE

OUTPUT WIRE

LED DRIVER:

DC OUTPUT:

34-40V

Regulated current:600 mA

Red:+ Black:-

C D L

Dimmable LED Driver

GRADATEURS LED

Chauffeur

____

_ _ _

MODEL : CDLPS600-R30

AC INPUT:

120Vac/Max:200mA

60 Hz PF>0.9

L-BLACK N-WHITE

Made in China

For Indoor Use Only

SUITABLE FOR DAMP LOCATIONS

Usage Intérieur Seulement

CONVIENT AUX

EMPLACEMENTS

HUMIDES

LVLE

RECOGNIZED

COMPONENT

4008390

CONFORMS TO UL

STD. 8750

CERTIFIED TO

CAN/CSA

STD. C22.2

NO. 250.13

MM/YY

Page 8

Problem Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

4. LED driver has malfunctioned. 4. Replace LED driver.

Fuse blows or circuit

breaker trips when light is

turned on.

1. Crossed wires or power wire is

grounding out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of

the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

EnviroLite



warrants this product to be free from defects in material and workmanship for

five years from the original date of purchase by the consumer. This warranty is limited to

the counter replacement at the time of purchase, with the original purchase receipt.

EnviroLite



will not be liable for the loss or damage of any kind, incidental or consequential

damages of any kind, whether based on warranty contract or negligence, and arising in

connection with the sale, use or repair of the product claimed to be defective. Some states

do not allow the exclusion or limitation of incidental or consequential damages so the above

limitation may not apply to you. This warranty gives you specific legal rights and you may

also have other rights, which vary from state to state. Misuse, accident, improper

installation or maintenance will also void the warranty.

FIVE-YEAR LIMITED WARRANTY

MANUAL DE INSTRUCCIONES

Page 9

RIEL FIJO CON CUATRO LUCES LED

MODELO EVT1020

Page is loading ...

EnviroLite EVT102027-35 Installation guide

Brand: EnviroLite

Model: EVT102027-35

Type: Installation guide

This particular model comes with four decorative glass shades that can be twisted into place to secure them.

The track can be mounted to a ceiling using the included mounting bracket and screws.

It is also dimmable, so you can adjust the brightness of the light to suit your needs, which is especially useful in living rooms and bedrooms.

Download PDF

report

in other languages

français: EnviroLite EVT102027-35 Guide d'installation
español: EnviroLite EVT102027-35 Guía de instalación

EnviroLite EVT102027-35 Installation guide

EnviroLite EVT102027-35 Installation guide

in other languages

Related papers

Other documents