EnviroLite EVT101227A-35 Installation guide

Brand: EnviroLite

Model: EVT101227A-35

Type: Installation guide

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

Easy to install
Energy Efficient LED Lighting
ENERGY STAR® qualified

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

Easy to install
Energy Efficient LED Lighting
ENERGY STAR® qualified

INSTRUCTIONS MANUAL

FOUR LIGHT LED FIXED TRACK

Page 1

MODEL EVT101227A

Page 2

Thank you for purchasing this EnviroLite



Four Light LED Fixed Track. This product has been

manufactured with the highest standards of safety and quality.

FEATURES:

Please call our Customer Service Team at 1-855-573-6156.

QUESTIONS, PROBLEMS, MISSING PARTS:

1. Easy to install.

2. Energy Efficient LED Lighting

3. ENERGY STAR® qualified

CAUTION:

1. Before starting installation of this fixture or removal of a previous fixture, disconnect the

power by turning off the circuit breaker or by removing the fuse at the fuse box.

2. CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS. If you

have any non-electrical questions about this fixture, please call our Customer Service

Team at 1-855-573-6156.

3. KEEP your receipt and these Instructions for Proof of Purchase.

TOOLS REQUIRED FOR INSTALLATION (not included):

Safety

goggles

Wire

strippers

Phillips

screwdriver

Electrical

tape

Wire

cutters

Flathead

screwdriver

Page 3

INSTALLATION INSTRUCTIONS:

1. Remove the Canopy Mounting Screws (#6) from the Mounting Bracket (#4). Keep the Canopy Mounting

Screws (#6). (Fig. 2)

2. Rotate the Swivel Bar (#9) of the Mounting Bracket (#4) so that it is perpendicular to the Straight Bar

(#7). (Fig. 3)

3. Pull the power supply wires out from the Outlet Box (#3), and mount the Mounting Bracket (#4) to the

Outlet Box (#3), using the Bracket Mounting Screws (#5). (Fig. 4)

4. Turn the Swivel Bar (#9) to the desired position, keeping in mind that it will determine the final

orientation of the Fixture itself. Tighten both Center Screws (#17). (Fig. 4)

5. Attach the Black Supply Wire (#14) to the Black Fixture Wire (#10) and the White Supply Wire (#15) to

the White Fixture Wire (#11) using Wire Nuts (#13). Connect the Fixture Ground Wire (#12) and the

Supply Ground Wire (#16) together using a Wire Nut (#13). Wrap all wire connections with electrical

tape for a more secure connection. (Fig. 5) Note: If you have electrical questions, consult your local

electrical code for approved grounding methods.

6. Carefully tuck all Wires and Wire Nuts (#13) into the Outlet Box. Place the Canopy (#8) of the Fixture

over the Outlet Box (#3), flush against the ceiling surface, making sure the Canopy Mounting Holes align

with the Mounting Holes of the Swivel Bar (#9). Thread the Canopy Mounting Screws (#6) into the

Canopy Mounting Holes to secure the Canopy (#8) onto the Swivel Bar and flush against the ceiling. (Fig.

7. Proceed back to the Assembly Instructions.

8. Installation is complete. Turn on power at the circuit breaker or fuse box. Turn the light switch on to

activate the fixture.

PARTS INCLUDED FOR INSTALLATION (parts are not to scale):

3 ea Wire

Nuts (#14)

2 ea Bracket Mounting

Screws (#5)

1 ea Mounting

Bracket (#4)

1 ea Fixture (#1)

Page 4

INSTALLATION:

3. Outlet Box

6. Canopy

Mounting

Screw

8. Canopy

6. Canopy

Mounting Screw

4. Mounting

Bracket

Fig. 2

17. Center

Screws

9. Swivel

Bar

Fig. 4

11. White Fixture Wire

12. Fixture

Ground Wire

13. Wire Nut

15. White Supply Wire

14. Black Supply Wire

16. Supply

Ground Wire

3. Outlet Box

10. Black Fixture Wire

8. Canopy

Fig. 5

Fig. 6

9. Swivel

Bar

5. Bracket

Mounting Screw

3. Outlet Box

Fig. 3

7. Straight

Bar

3. Outlet Box

Page 5

DIMMING:

Dimming performance may

depend on the dimmer, the

dimmer range adjustment setting

(for dimmers with brightness range

adjustments), the wiring method,

and/or the number of LED modules

installed onto the dimmer circuit.

For a complete list of compatible

dimmers, please go to

www.envirolite-LED.com and

search your product’s item

number.

LIGHT DISTRIBUTION DIAGRAM:

POWER

TRIAC

DIMMER

WHITE

BLACK

BARE/

GREEN

WHITE

BLACK

BARE/

GREEN

FIXTURE

OUTPUT WIRE

LED DRIVER:

180 170 160 150 140

0 10 20 30 40

130

120

110

100

4,200

3,500

2,800

2,100

1,400

700

CD: 0

700

1,400

2,100

2,800

3,500

4,200

Constant Current LED Driver & Triac Dimmer

P/N:CDLPS600R27

Vin: 108-135VAC 60Hz

Iin: 0.4A Max

Vout: 30-43 VDC

Iout: 600mA C.C.

Max Pout: 25.8W

PF: > 0.90

CAUTION: Risk of Electric Shock,

Suitable for Damp Locations

Made in China

●

DC OUTPUT

+ = RED

– = BLACK

AC INPUT

L = BLACK

N = WHITE

Page 6

Problem Possible Cause Corrective Action

1. Power is off. 1. Make sure power supply is on.

2. Faulty switch. 2. Test or replace switch.

3. Faulty wire connection. 3. Check wiring.

4. LED driver has malfunctioned. 4. Replace LED driver.

Fuse blows or circuit

breaker trips when light is

turned on.

1. Crossed wires or power wire is

grounding out.

1. Check wire connections.

Light will not turn on.

TROUBLESHOOTING:

PRODUCT MAINTENANCE:

1. To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean

water, never a solvent) to wipe the surface of the fixture.

2. To clean the inside of the fixture, first disconnect power to the fixture by turning off the

circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly

dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of

the fixture.

3. Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft

cloth to dust or wipe carefully.

EnviroLite



warrants this product to be free from defects in material and workmanship for

five years from the original date of purchase by the consumer. This warranty is limited to

the counter replacement at the time of purchase, with the original purchase receipt.

EnviroLite



will not be liable for the loss or damage of any kind, incidental or consequential

damages of any kind, whether based on warranty contract or negligence, and arising in

connection with the sale, use or repair of the product claimed to be defective. Some states

do not allow the exclusion or limitation of incidental or consequential damages so the above

limitation may not apply to you. This warranty gives you specific legal rights and you may

also have other rights, which vary from state to state. Misuse, accident, improper

installation or maintenance will also void the warranty.

FIVE-YEAR LIMITED WARRANTY

MANUAL DE INSTRUCCIONES

Page 7

RIEL FIJO CON CUATRO LUCES LED

MODELO EVT101227A

Page is loading ...

MODE D’INSTALLATION

Page 13

RAIL D’ÉCLAIRAGE À 4 LUMIÈRES DEL

MODÈLE EVT101227A

Page is loading ...

EnviroLite EVT101227A-35 Installation guide

Brand: EnviroLite

Model: EVT101227A-35

Type: Installation guide

EnviroLite EVT101227A-35 is a Four Light LED Fixed Track, manufactured with high standards of safety and quality, with the following features and use cases:

EnviroLite EVT101227A-35 Installation guide

EnviroLite EVT101227A-35 Installation guide

in other languages

Related papers

Other documents