Akura APLDVD18568 User guide

Base fitting and removal.

Apply the base plate to the base mounting and fit the four screws

provided. Tighten the four screws using a “Posi No 1” screwdriver.

To Wall mount the TV. . Place TV onto its face, and with a “Posi No 1”

screwdriver, remove the screws. Lift the base away from the TV. You

may use the 4 screws to attach the wall mounting bracket to the TV.

See Page (21 or 24) in the Instruction booklet to see more information.

To fit the base plate.

Place the TV face down on a suitable surface with the base mounting facing

you (Fig 1).

Fig 1

This manual is also suitable for

Download PDF