Carlon B620DC User manual

B620DC
Carlon
Brand
Carlon
Model
B620DC
Type
User manual
Carlon
®
Non-Metallic
Switch, Outlet and
Ceiling Boxes
Blue PVC Boxes
PVC Boxes
Brown Phenolic Boxes
Orange Low Voltage
Structured Cable
Management System
(SCMS)
Black Polycarbonate Boxes
Vapor Barrier PC Boxes
Ceiling Boxes
United States
Tel: 901.252.8000
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:51 AM Page A
Wall Boxes
Wall Boxes
Table of Contents
Blue PVC Boxes ..................................................................................... 3
Black Polycarbonate Boxes .................................................................... 15
Vapor Barrier Boxes .................................................................. 19
Ceiling Boxes........................................................................................ 21
Brown Phenolic Boxes ........................................................................... 24
Orange Low Voltage Structured Cable Management System (SCMS) ........... 38
Introduction............................................................................................ 1
Blue PVC Boxes ................................................................................... 12
Covers and Accessories ......................................................................... 50
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:51 AM Page B
1
Wall Boxes
Wall Boxes
Recognized as the Industry Standard
in Non-Metallic Boxes
Carlon
®
non-metallic boxes feature a rugged polycarbonate construction to
withstand extreme temperatures. The boxes will not distort or soften in heat,
and they won’t become brittle in the cold.
Carlon
®
Black Polycarbonate Boxes
Carlon
®
non-metallic boxes feature PVC construction for easier installation,
greater performance, and lower installation cost. Designed and listed for use
with non-metallic sheathed cable in accordance with Article 314 of the
National Electrical Code
®
, they make fast work of any residential or light
commercial application.
Carlon
®
Blue PVC Boxes
Carlon
®
Orange Structured
Cable Management System
Carlon
®
structured cable management system (SCMS) is designed for general
purpose low voltage residential wire and cable management. This series of
boxes and brackets are accompanied by a corrugated conduit system and
accessories to future proof your home.
New Fire Rating! Carlon
®
phenolic boxes can be installed in the same stud
cavity of a shared two-hour wall. They may also face opposite directions with
only a 3" horizontal separation — ideal for multi-family construction!
Carlon
®
Brown Phenolic Boxes
Carlon Super Blue
®
provides all of the desired features of a PVC box with
the strength and durability of the heavy wall boxes. Rigid enough not to flex
when nailed to a stud and strong enough to withstand a hammer blow in
cold temperatures
Carlon SuperBlue
®
Boxes
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:51 AM Page 1
Wall Boxes
2
Bottom Nailed
Most widely accepted for
universal use
Compound Angled
Nails
For easy installation and
positioning in limited space
Reverse Angled
Side
Nails
For use when installed from
backside of drywall
Recessed Angle
Nails
For quick positioning on
narrow stud spacing
Angled Side Nails
For quick positioning on
narrow stud spacing
SB, #5, #7 Offset
Brackets
For face mount on wood
or steel studs
Ears, #8 Bracket
Snap-in bracket secures
box to wall
Ears, #4 Bracket
Swing bracket swings into
place secures box to wall
#738 Offset Bracket
With
3
⁄8” offset for face mount
on wood or steel studs
Ears
For screw mounting
direct to paneling
“N” Bracket
Easily positioned for maximum
use of box depth
#2 Bracket
Sturdy side mounting bracket,
support wire adds rigidity
Reverse angled nails for use
with narrow stud spacing
Bar extends for rigid installa-
tion between studs
#1 Raised Face
Bracket
For wood or steel studs, allows
for
1
⁄2" mud ring,
1
⁄2" drywall
Through bottom
Screw Mount
Flange with flash ring
Compound Angled
Side
Nails
For easy installation and
positioning in limited place
Screws, #9 Snap-in
Bracket
Snap-in bracket secures box
to wall
#94, #95 Bar Hangers
(16" and
24")
For easy installation, exact
centering of ceiling boxes
#3 Bracket
Easily positioned for maxi-
mum use of box depth
Fast Set Feature
For fast device mounting
High Clamp Feature
For easy cable entry
Angled Screws
For fast mounting on steel
stud
Non-Metallic Clamp
For easy cable entry
“R” Bracket
Nails or Screws
Side Bracket
Stabilizer
Bar
Wall Boxes
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:51 AM Page 2
3
Blue PVC Boxes
New Work Boxes
One-Gang Adjustable 21.0 Cu. In
B121ADJ
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B121ADJ 21.0 Adjustable bracket Adjusts 0" - 1
3
/4" 3.65 L x 2.25 W x 3.32 D 24
B118A
B120A-UPC
One-Gang Nail-On 18.0 - 20.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B118A 18.0 Captive nails – 3
3
/4 L x 2
1
/4 W x 2
7
/8 D 100
N1-710-M 18.0 Reverse angled side nails
7
⁄32" offset wallboard tabs 3
3
/4 L x 2
1
/4 W x 2
11
⁄16 D 100
RN-18-FS 18.0 Recessed angled nails Fast set 3
21
⁄32 L x 2
5
⁄16 W x 3 D 100
SNO-18 18.0 Angled side nails Hinge closure 4
1
⁄16 L x 2
5
⁄16 opening
3
7
⁄8 overall W x 1
3
⁄4 D
100
SNO-18-M 18.0 Angled side nails Locating tab hinge closure
3
/16" offset wall board tabs
4
1
⁄16 L x 2
5
⁄16 opening
3
7
⁄8 overall W x 1
3
⁄4 D
100
B120A-UPC 20.0 Captive nails – 3
7
/8 L x 2
1
/4 W x 3
1
/4 D 100
RN-21-FS 20.5 Recessed angled nails Fast set 3
21
⁄32 L x 2
5
⁄16 W x 3
3
⁄8 D 100
One-Gang Adjustable
• Patented design allows for adjustment from 0" to 1
3
/4" after installation
• Ideal for new work or retrofit upgrade applications
• Backless low voltage bracket and floor box designs available
• Ideal for various drywall thicknesses and wall finishes
N1-710-M
RN-18-FS
RN-21-FS
SNO-18-M
SNO-18
One-Gang Nail-On
Carlon
®
Blue PVC Boxes Carlon
®
non-metallic
boxes feature PVC construction for easier installation, greater performance, and
lower installation cost. Designed and listed for use with non-metallic sheathed
cable in accordance with Article 314 of the National Electrical Code
®
, they make
fast work of any residential or light commercial application.
•
All PVC boxes are listed to UL514C
•
All PVC boxes are listed for masonry walls
•
All PVC boxes are UL Classified for 2 hr. fire wall and/or fire ceiling
•
All PVC boxes meet NEMA OS-2
•
All PVC boxes are permissible for use with 90 degree C conductors
•
UL File E11461 and R9140
CARLON
EXCLUSIVE
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 3
Blue PVC Boxes
4
New Work Boxes
One-Gang Nail-On
RN-23 RN-23-FS
One-Gang Nail-On 22.0 - 22.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B122A-UPC 22.0 Captive nails – 3
3
/4 L x 2
1
/4 W x 3
1
/2 D 100
RN-23 22.5 Recessed angled nails – 3
21
⁄32 L x 2
5
⁄16 W x 3
3
⁄8 D 100
RN-23-FS 22.5 Recessed angled nails Fast set 3
21
⁄32 L x 2
5
⁄16 W x 3
3
⁄8 D 100
B122A-UPC
RD-30
One-Gang Nail-On 30.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
RD-30 30.0 Recessed angled nails Large KO for #6 or #8 cable 3
11
/16 L x 2
5
⁄16 opening 3
7
⁄8 overall W x 3
5
⁄8 D 50
MB-18-FS
MB-18
B108B-UPC
B118B-UPC
One-Gang Brackets
One-Gang Brackets 8.0 – 18.0 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B108B-UPC 8.0 Bracket — 3
5
/8 L x 2
3
/8 W 1
1
/4 D 25
B118B-UPC 18.0 Bracket for
3
/8" to
5
/8" wallboard –
steel and wood stud mounting
—3
3
/4 L x 2
1
/4 W x 2
15
/16 D50
• MB-18 18.0 Molded side bracket for wood/steel studs
1
⁄2" depth gage Lever clamps 3
21
⁄32 L x 2
5
⁄16 W x 2
15
/16 D 100
• MB-18-FS 18.0 Molded side bracket for wood/steel studs Fast set 3
21
⁄32 L x 2
5
⁄16 W x 2
15
/16 D 100
•
Manufactured housing — MB-18 and MB-18-FS.
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 4
5
Blue PVC Boxes
New Work Boxes
SN-236-FS
SN-241
SN-241-FS
N2-1614-MNC SN-236N2-1614-RNC SN-236-V
B232A-UPC
SB2-236-FS
B232B-UPC
Two-Gang Nail-On 32.0 - 41.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B232A-UPC 32.0 Captive nails — 3
3
⁄4 L x 4 W x 3 D 50
N2-1614-MNC 32.0 Angled side nails
7
⁄32" offset wallboard tabs Cable-Lok™ clamps bulk packed 4
1
/16 L x 3
5
⁄8 W x 2
3
⁄4 D50
N2-1614-RNC 32.0 Angled side nails No wallboard tabs Cable-Lok™ clamps bulk packed 4
1
/16 L x 3
5
⁄8 W x 2
3
⁄4 D 50
SN-236 36.0 Compound angled nails
3
⁄8" offset wallboard tabs molded fast clamp 4 L x 3
5
⁄8 W x 3
1
⁄8 D50
SN-236-FS 36.0 Compound angled nails
3
⁄8" offset wallboard tabs molded fast clamp/fast set 4 L x 3
5
⁄8 W x 3
1
⁄8 D 50
SN-236-V 36.0 Compound angled nails
3
⁄8" offset wallboard tabs molded V-clamp 4 L x 3
5
⁄8 W x 3
1
⁄8 D50
SN-241 41.0 Compound angled nails
3
⁄8" offset wallboard tabs molded fast clamp 4 L x 3
5
⁄8 W x 3
5
⁄8 D 50
SN-241-FS 41.0 Compound angled nails
3
⁄8" offset wallboard tabs molded fast clamp/fast set 4 L x 3
5
⁄8 W x 3
5
⁄8 D50
Two-Gang Bracket 32.0 - 36.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B232B-UPC 32.0 Bracket for
3
/8"to
5
/8" wallboard – steel or wood stud mounting — 3
3
⁄4 L x 4 W x 3 D 50
SB2-236-FS 36.0 Two
3
/8" offset brackets for wood/steel studs
3
⁄8" offset 3
9
/16 L x 4 W x 3
9
/16 D20
Two-Gang Nail-On
Two-Gang Bracket
Two-Gang Adjustable 34.0 Cu. In
B234ADJCB234ADJ
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B234ADJ 34.0 Adjustable bracket Adjusts 0" - 1
3
/4" 3.65 L x 4.00 W x 3.00 D 16
B234ADJC 34.0 Adjustable bracket Large 220V knockout 3.65 L x 4.00 W x 3.00 D 16
Two-Gang Adjustable
CARLON
EXCLUSIVE
• Patented design allows for adjustment from 0" to 1
3
/4" after installation
• Ideal for new work or retrofit upgrade applications
• Backless low voltage bracket and floor box designs available
• Ideal for various drywall thicknesses and wall finishes
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 5
Blue PVC Boxes
6
New Work Boxes
Three-Gang Nail-On
Three-Gang Bracket
SN-357-FSSN-357
SB2-357-FS
SB-357
B344AB
Three-Gang Nail-On 44.0 - 56.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B344AB 44.0 Captive nails and bracket support — 5
5
/8 L x 3
3
/4 W x 2
11
/16 D 30
SN-357 56.5 Compound angled nails 3⁄8" offset wallboard tabs molded Fast Clamp 5
13
/16 L x 3
5
⁄8 W x 3
7
⁄16 D20
SN-357-FS 56.5 Compound angled nails 3⁄8" offset wallboard tabs molded Fast Clamps/Fast Set 5
13
/16 L x 3
5
⁄8 W x 3
7
⁄16 D 20
Three-Gang Bracket 56.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
SB-357 56.5 One
3
⁄8" offset bracket for wood/steel studs 3⁄8" wallboard tabs molded Fast Clamps 3
5
/8 L x 5
13
⁄16 W x 3
7
⁄16 D 30
SB2-357-FS 56.5 Two
3
⁄8" offset brackets for wood/steel studs 3⁄8" wallboard tabs molded Fast Clamps/Fast Set 3
5
/8 L x 5
13
⁄16 W x 3
7
⁄16 D20
Three-Gang Adjustable 49.0 Cu. In.
B349ADJ
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B349ADJ 49.0 Adjustable bracket Adjusts 0" - 1
3
/4" 5
13
/16 L x 3
5
⁄8 W x 3 D 16
Three-Gang Adjustable
CARLON
EXCLUSIVE
• Patented design allows for adjustment from 0" to 1
3
/4" after installation
• Ideal for new work or retrofit upgrade applications
• Backless low voltage bracket and floor box designs available
• Ideal for various drywall thicknesses and wall finishes
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 6
7
Blue PVC Boxes
New Work Boxes
Four-Gang Nail-On
4" Square
B455A-UPC
B455AH
B418A-UPC
4S-812C
B432A-UPC
Four-Gang Nail-On 55 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B455AH 55.0 Captive nails, bracket support and hanger bar — 7
3
/5 L x 3
7
/10 W x 2
1
/2 D 25
B455A-UPC 55.0 Captive nails and bracket support — 7
3
/5 L x 3
7
/10 W x 2
1
/2 D25
4" Square 18.0 - 32.0 Cu. In
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
4S-812C 18.0 Angled side nails — 4 L x 4 W x 1
7
/16 D 100
B418A-UPC 18.0 Captive nails and molded bracket — 4 L x 4 W x 1
5
/8 D75
B432A-UPC 32.0 Captive nails — 4 L x 4 W x 2
5
/8 D 50
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 7
Blue PVC Boxes
8
Old Work Boxes
One-Gang
B108R-UPC
B117RSWB114R-UPC
E-18-4
E-16-8
B120R
One-Gang 8.0 - 17.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B108R-UPC 8.0 Mounting ears — 3
5
/8 L x 2
3
/8 W x 1
1
/4 D 25
B114R-UPC 14.0 Mounting ears and swing clamps Integral Clamps 4
1
/8 L x 2
1
/4 W x 2
3
/4 D50
• B117RSW 17.0 Mounting ears and swing clamps Access panel 3.64 L x 4.07 W x 2.00 D (2.20" opening) 30
One-Gang 16.0 - 20.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
E-16-8 16.0 Thermoplastic molded ears #8 snap in Molded fast clamps 3
1
/2 L x 2
1
⁄4 W x 2
11
⁄16 D 50
E-18-4 18.0 Thermoplastic molded ears #4 swing brackets Integral molded V-clamp 3
25
/32 L x 2
7
⁄32 W x 3 D 100
B120R 20.0 Mounting ears and swing bracket Integral clamps 4
1
/8 L x 2
5
/16 W x 3
5
/8 D 50
•
Not UL Classified for Fire Resistance
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 8
9
Blue PVC Boxes
Old Work Boxes
B225R-UPC
B355R
B468R
Two-Gang 25.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B225R-UPC 25.0 Mounting ears and 2 swing clamps Integral clamps 3
15
/16 L x 3
1
/8 W x 2
3
/4 D 30
Three-Gang 55.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B355R 55.0 Mounting ears and 2 swing clamps Integral clamps 5.72 L x 2.79 W x 3.69 D 6
Four-Gang 68.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
B468R 68.0 Mounting ears and 2 swing clamps Integral clamps 7.57 L x 2.89 W x 3.56 D 6
Two-Gang
Three-Gang
Four-Gang
•
Not UL Classified for Fire Resistance
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 9
Blue PVC Boxes
10
Ceiling Boxes – New Work
B520A-UPC
B520P-UPC B620L-UPC
B720R-SHK
35 lbs. maximum fan weight
B518A-UPC B518P-UPC
3/0 18 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• B518A-UPC 18.0 Captive nails Integral clamps 3 Dia. x 2
3
/4 D 75
• B518P-UPC 18.0 Captive nails Ground lug and screw attached; integral clamps 3 Dia. x 2
3
/4 D 75
•
Listed for fixture support up to 50 lbs.
3/0 - 4/0 Combination 20 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• B520A-UPC 20.0 Captive nails Fixture spacing for 2
3
/4" and 3"; 6 integral clamps 4 Dia. x 2
1
/4 D 75
• B520P-UPC 20.0 Captive nails Ground lug and screw attached; fixture spacing for 2
3
/4"
and 3
1
/2"; 6 integral clamps
4 Dia. x 2
1
/4 D75
• B620L-UPC 20.0 Metal L bracket Fixture spacing for 2
3
/4" and 3
1
/2"; 6 integral clamps 4 Dia. x 2
1
/4 D 100
• B720R-SHK 20.0 Mounting screws 6 integral clamps 4 Dia. x 2
1
/4 D18
•
Listed for fixture support up to 50 lbs.
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 10
11
Blue PVC Boxes
Ceiling Boxes – New Work
B620H-UPC
B620K
B620KG-UPC
3/0 - 4/0 Combination 20.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• B620DC 20.0 24" T-Grid bar hanger Ceiling box fixture spacing for 2
3
/4" and 3
1
/2" 4 Dia. x 2
1
/4 D 6
• B620H-UPC 20.0 11.50" - 18.50" adjustable bar hanger
Ceiling box fixture spacing for 2
3
/4" and 3
1
/2";
integral clamps
4 Dia. x 2
1
/4 D75
• B620HG-UPC 20.0
11.50" - 18.50" adjustable bar hanger
Ceiling box fixture spacing for 2
3
/4" and 3
1
/2";
ground lug and screw attached; integral clamps
4 Dia. x 2
1
/4 D 75
• B620K 20.0 14.38" - 22.50" adjustable bar hanger
Ceiling box fixture spacing for 2
3
/4" and 3
1
/2";
integral clamps
4 Dia. x 2
1
/4 D75
• B620KG-UPC 20.0
14.38" - 22.50" adjustable bar hanger
Ceiling box fixture spacing for 2
3
/4" and 3
1
/2";
ground lug and screw attached; integral clamps
4 Dia. x 2
1
/4 D 75
•
Listed for fixture support up to 50 lbs.
B620DC
B618RP-UPC
4" Round 18.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS
STD. CTN.
QTY.
• B618R-UPC 18.0 Swing clamps Integral clamps 4
1
/4 Dia. x 2
5
/8 D 100
• B618RP-UPC 18.0 Swing clamps Integral clamps; ground lug 4
1
/4 Dia. x 2
5
/8 D 100
•
Not listed for fixture support in ceilings
Old Work
Ceiling Boxes with Bar Hanger
B620HG-UPC
B618R-UPC
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 11
12
New Work
BH122A-UPC BH122S
One-Gang 22.0 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH122A-UPC 22.0 Nails One-gang 3
7
/8 L x 2
3
/8 W x 3
3
/4 D 100
BH122S 22.0 Screws One-gang 3
7
/8 L x 2
3
/8 W x 3
3
/4 D 100
Two-Gang 35.0 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH235A 35.0 Nails Two-gang; integral clamps 3
7
/8 L x 4
1
/8 W x 3
1
/2 D 48
BH235S 35.0 Screws Two-gang; integral clamps 3
7
/8 L x 4
1
/8 W x 3
1
/2 D48
Carlon SuperBlue
®
Boxes
combine the features of the hard shell thermoset box and
the thermoplastic PVC style box to create a “new” rigid
non-metallic wiring box. Molded out of specially formulated
thermoplastic material, Carlon SuperBlue
®
boxes are so strong
they won't crack or break in extreme environments. So rigid,
they resist flexing and hold their shape even in the worst
applications. The boxes are designed to nest inside each other
to take up less space on the shelf or in the truck, while
still providing the largest wirefill capacity in their class.
•
All PVC boxes are listed to UL514C
•
All PVC boxes are listed for masonry walls
•
All PVC boxes are UL Classified for 2 hr. fire wall and/or fire ceiling
•
All PVC boxes meet NEMA OS-2
•
All PVC boxes are permissible for use with 90 degree C conductors
•
UL File E11461 and R9140
SuperBlue
™
Boxes
SuperBlue
®
PVC Boxes
BH235SBH235A
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 12
13
SuperBlue
®
PVC Boxes
SuperBlue
™
Boxes
BH353A BH353S
BH464A BH464S
BH118R
BH234R
Three-Gang 53 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH353A 53.0 Nails Three-gang; integral clamps 5
7
/8 L x 3
3
/4 W x 3
1
/2 D 24
BH353S 53.0 Screws Three-gang; integral clamps 5
7
/8 L x 3
3
/4 W x 3
1
/2 D24
Four-Gang 64 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH464A 64.0 Nails and molded bracket Four-gang; integral clamps 7
3
/4 L x 3
7
/8 W x 3
1
/2 D 24
BH464S 64.0 Screws and molded bracket Four-gang; integral clamps 7
3
/4 L x 3
7
/8 W x 3
1
/2 D24
One-Gang 18.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH118R 18.0 Mounting ears & swing clamps One-gang; integral clamps 3
7
/8 L x 2
3
/8 W x 3
5
/8 D 36
Two-Gang 34.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
BH234R 34.0 Mounting ears & swing clamps Two-gang; integral clamps 3
7
/8 L x 2
3
/8 W x 3
5
/8 D 18
New Work
Old Work
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 13
14
Ceiling Boxes
BH525A-UPC BH525P
BH525L
BH525H
BH614RP
BH614R
3/0-4/0 Combination 25.0 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• BH525A-UPC 25.0 Nails Integral clamps 4 Dia. x 3.00 D 48
• BH525P 25.0 Nails Integral clamps; ground lug and screw attached 4 Dia. x 3.00 D 24
•
Listed for fixture support up to 50 lbs.
Fan Box 25.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• BH525L 25.0 L bracket and nails Integral clamps 4 Dia. x 3.00 D 24
• BH525LP 25.0 L bracket and nails Integral clamps; ground lug and screw attached 4 Dia. x 3.00 D 24
•
Listed for fan support up to 35 lbs. and fixture support up to 50 lbs.
Ceiling Box with Hanger Bar 25.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
• BH525H 25.0 Hanger bar 11
1
/2" to 18
1
/2" Integral clamps 4 Dia. x 3.00 D 20
• BH525HP 25.0 Hanger bar 11
1
/2" to 18
1
/2" Integral clamps; ground lug and screw
attached
4 Dia. x 3.00 D 20
•
Listed for fixture support up to 50 lbs.
3
1
/2" 14.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
•† BH614R 14.5 Base, ears & snap-in bracket Round old/new work box 3
1
/2 Dia. x 2
3
/8 D 24
•† BH614RP 14.5 Base, ears & snap-in bracket Round old/new work box w/ground lug 3
1
/2 Dia. x 2
3
/8 D24
•
Listed for wall fixture support up to 10 lbs.
†
Tighten screws to to 10 in.-lbs.
SuperBlue
™
Boxes
SuperBlue
®
PVC Boxes
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 14
15
Black Polycarbonate Boxes
New Work Boxes
Grip-On GO Box
®
Single Gang Outlet Box
• Instead of nails or other fasteners,
unique clamps are used to hold the
box securely in place. Simply push
onto the stud and go
• The GO Box outlet box is removable
for easy repositioning
• “Fast-Set” mounting holes enable
quick installation of devices
• Perfectly aligned every time
• Perfect for drywall depth
• A locator hole in the mounting brack-
et helps position the box on marked
studs for accurate installation
118-N 120-N 122-N
120-N-FS
122-N-FS
One-Gang 23.0 Cu.In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
GO-23 23.0 Grip-On bracket — 3
3
⁄4 L x 2
3
⁄8 W x 2
1
⁄2 D 30
GO-23-FS 23.0 Grip-On bracket Fast-Set 3
3
⁄4 L x 2
1
⁄4 W x 2
11
⁄16 D30
One-Gang Nail-On 18.0 - 22.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
118-N 18.0 Angled side nails — 3
3
⁄4 L x 2
1
⁄4 W x 2
7
⁄8 D 100
120-N 20.3 Angled side nails — 3
3
⁄4 L x 2
1
⁄4 W x 3
3
⁄16 D 100
120-N-FS 20.3 Angled side nails Fast Set 3
3
⁄4 L x 2
1
⁄4 W x 3
3
⁄16 D 100
122-N 22.5 Angled side nails — 3
3
⁄4 L x 2
1
⁄4 W x 3
3
⁄16 D 100
122-N-FS 22.5 Angled side nails Fast Set 3
3
⁄4 L x 2
1
⁄4 W x 3
3
⁄16 D 100
Carlon
®
non-metallic boxes feature a rugged polycarbonate construction to
withstand extreme temperatures. The boxes will not distort or soften in
heat, and they won’t become brittle in the cold.
•
All Polycarbonate boxes are listed to UL514C
•
All Polycarbonate boxes are listed for masonry walls
Carlon
®
Black Polycarbonate Boxes
•
Except as indicated, all Polycarbonate boxes are UL Classified for 2 hr. fire wall
and/or fire ceiling
•
All Polycarbonate boxes meet NEMA OS-2
•
All Polycarbonate boxes are permissible for use with 90 degree C conductors
•
UL File E11461 and R9140
• The GO Box design is UL Listed
• 23.0 cu. in. capacity accommodates large
devices and offers easy installation of wiring
It’s a whole new ball game for high-volume
residential products. That’s because the Carlon
®
GO Box
®
product line is one of the most revolutionary
labor-saving products ever designed. The GO stands
for “Grip-On,” and that’s exactly how it works. Just
push the box onto a stud and the specially designed
clamps hold it in place. No tools or fasteners are
required, reducing installation time, which means you
can move on to the next job. When it comes to lower
installed costs, this changes everything!
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 15
16
Black Polycarbonate Boxes
New Work Boxes
118-LB
120-LB 120-LBP 122-LB
122-LBP
118-LBP
New Work Boxes
234-LB
234-N
234-NP
One-Gang Brackets 18.0 - 22.5 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
118-LB 18.0 Molded side bracket for wood/steel studs — 3
3
/4 L x 2
1
/4 W x 2
7
/8 D 100
118-LBP 18.0 Molded side bracket for wood/steel studs POSI-SET
®
Fast Set 3
3
/4 L x 2
1
/4 W x 2
7
/8 D 100
120-LB 20.3 Molded side bracket for wood/steel studs — 3
3
/4 L x 2
1
/4 W x 3
3
/16 D 100
120-LBP 20.3 Molded side bracket for wood/steel studs POSI-SET
®
Fast Set 3
3
/4 L x 2
1
/4 W x 3
3
/16 D 100
122-LB 22.5 Molded side bracket for wood/steel studs — 3
3
/4 L x 2
1
/4 W x 3
5
/8 D 100
122-LBP 22.5 Molded side bracket for wood/steel studs POSI-SET
®
Fast Set 3
3
/4 L x 2
1
/4 W x 3
5
/8 D 100
Two Gang Nail-On 34.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
234-N 34.0 Angled side nails POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 4 W x 3
3
⁄32 D 50
234-NP 34.0 Angled side nails POSI-WEDGE
®
POSI-SET
®
3
3
⁄4 L x 4 W x 3
3
⁄32 D50
Two Gang Bracket 34.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
234-LB 34.0 Steel side bracket for wood/steel studs POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 4 W x 3
3
⁄32 D 50
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 16
17
Black Polycarbonate Boxes
New Work Boxes
345-N
345-LB
New Work Boxes
460-SB-24
460-LB
460-SB
Four Gang Nail-On 60 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
*
460-SB
60.0 Angled side nails & back bracket POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 7
9
⁄16 W x 2
3
⁄4 D 10
*
• 460-SB-24 60.0 Angled side nails & back bracket POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 7
9
⁄16 W x 2
3
⁄4 D10
Three-Gang Nail-On 45.0 Cu.In
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
345-N 45.0 Angled side nails POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 5
13
⁄16 W x 2
3
⁄4 D 20
Three Gang Bracket 45 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
345-LB 45.0 Steel side bracket for wood/steel studs POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 5
13
⁄16 W x 2
3
⁄4 D 25
Four Gang Bracket 60 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
*
460-LB 60.0 Steel side brackets for wood/steel studs POSI-WEDGE
®
cable clamps 3
3
⁄4 L x 7
9
⁄16 W x 2
3
⁄4 D 8
•
24" adjustable bracket
*
Not UL Classified for fire wall and/or fire ceiling.
* Not UL Classified for fire wall and/or fire ceiling.
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 17
18
Black Polycarbonate Boxes
New Work Boxes
New Work Box
4S-32-N
114-OW
118-OW
Old Work Boxes
232-OW
4" Square Boxes 32.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
4S-32-N 32.0 Angled side nails POSI-WEDGE
®
cable clamps 4 L x 4 W x 2
9
⁄16 D 50
Two-Gang 32.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
232-OW 32.0 Swing-ear brackets POSI-WEDGE
®
cable clamps 3
5
⁄8 L x 4
1
⁄16 W x 3
3
⁄16 D 50
One-Gang 14.0 – 18.0 Cu. In.
CAT. NO.
SIZE
CU. IN. MOUNTING MEANS DESCRIPTION DIMENSIONS (IN.)
STD. CTN.
QTY.
114-OW 14.0 Swing-ear brackets — 3
1
⁄2 L x 2
9
⁄32 W x 2
7
⁄8 D 50
118-OW 18.0 Swing-ear brackets — 3
13
⁄16 L x 2
1
⁄4 W x 3
1
⁄32 D 100
GM-19_2-01-10:GM-19_2-01-10 7/26/10 9:52 AM Page 18
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Carlon B620DC User manual

B620DC
Carlon
Brand
Carlon
Model
B620DC
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents