Base fitting and removal.
Place the TV face
down on a suitable
surface with the base
mounting facing
towards you (Fig 1).
Place the base plate
onto the TV ensuring
the locating pegs (Fig
2) are located in the
Locating holes.
Fit the four screws
provided into the holes
as shown in Fig 3.
Tighten using a No 1
Posi screwdriver.
If wall mounting the TV
see page 21 in the
Main Instruction book.
Fig 1
Fig 3
Fig2
Model : APL2668 All versions
-
1
Akura APLDVD2668-FD User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI