Akura ALEDVD31511E User guide

Base fitting and removal.

Place the TV face

down on a suitable

surface with the base

mounting facing

towards you (Fig 1).

Remove the two

screws fixing the

Decorative ring.

Ensure the decorative ring is in position and place the base plate onto the TV

Fit the four screws (4mm x 12mm) provided into the holes as shown in Fig 2. Tighten

using a No 1 Posi screwdriver. Ensure the Base Plate is facing the correct way (Fig 3)

If wall mounting the TV see page 20 in the Main Instruction book.

Fig 1

Fig2

Model : ALEDVD31511E