AMG AMG2222 Instruction Sheet

  • Hello! I've reviewed the provided document for the AMG2222 Standalone Two Channel Video Only Fibre Optic Transmitter. This document contains details about the device's video and optical connections, including specifications for connectors, impedance, input levels, and launch power. I'm ready to answer any questions you have about this device.
  • What type of video connectors does the device use?
    What is the input impedance of the video input?
    What type of optical connectors does the device use?
    What is the nominal wavelength of the optical signal?
    What is the range of the power supply?
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 1 of 2 D03586-01
AMG2222
Instruction Sheet
AMG2222 Standalone Two Channel Video Only Fibre Optic Transmitter
Video Connection
Connectors ...........................75 ohm BNC Socket.
Input Impedance...................75 ohm terminated.
Input Level ...........................1 volt p-p nominal.
Frequency Response.............10Hz to 10MHz min.
Optical Connection
Connectors............................ST Style
Launch Power
50/125............................-20dBm min. -17dBm typ.
62.5/125.........................-17dBm min. -14dBm typ.
Wavelength...........................850nm nominal.
VIDEO IN 1
VISION 2000
FIBRE TRANSMITTER
100mm
170mm
35mm
100mm
136mm
A
DC IN
+15V @ 200mA
A
AA
18mm
Detail A -Slot size 4.2mm x 10mm
FRONT PANEL INDICATORS
POWER
OPTO OUT 3
OPTO OUT 2
OPTO OUT 1
VIDEO IN 2
VIDEO IN 3
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 2 of 2 D03586-01
Power Connection
Supply...................................+12 volts D.C. to +18 volts D.C. 250mA
Connection ...........................2 Pin Latching Lemo Connector
AMG Pt No. G0003000
Lemo Pt No. ERA05302CCL
Polarity
1
2
1
1
2 2
- 0v
- +ve
Dimensions
See Drawing above.
Mounting Details
See Drawing above.
Always allow for bend radius of optical and electrical cables when mounting.
Indicators
Power....................................Green – lit when unit powered
/