Intergraph InterServe 9400 User manual

Brand: Intergraph

Model: InterServe 9400

Type: User manual

Intergraph InterServe 9400 is a versatile server featuring Intel Server Control (ISC) technology. ISC enables comprehensive hardware monitoring, providing detailed information about the health and status of your system's components. Through DMI indications and SNMP traps, ISC notifies you of any potential issues, ensuring proactive maintenance and minimizing downtime. Additionally, the included SYSBUILDER diskette and System CD empower you to conveniently rebuild your system software, streamlining the process of restoring or updating your operating system and associated software.

D5AA00092, 09/99

InterServe 9400

Late-Breaking News

Hardware

Intel Server Control (ISC) Errors

The first time you run Intel Server Control (ISC) after installation, you may see DMI indications

and SNMP traps. The first time ISC runs, it processes all messages in the System Event Log,

regardless of the date and time an event happened, and generates DMI indications. If SNMP

services are enabled, ISC will also generate an SNMP trap for each indication. After the System

Event Log has been processed once, only new entries generate DMI indications and SNMP traps.

Some DMI indications and SNMP traps may report critical status or failure of some hardware

components. If you are running ISC for the first time, you may safely ignore these indications and

traps. They are caused by events recorded in the System Event log during a period when ISC is

initializing for the first time and is unable to report accurate status. You may want to confirm that

all components are working correctly by examining the System Event Log for Informational

messages stating that the failing components have returned to a functioning state. You may also

want to clear the System Event Log.

After you run ISC for the first time, you should investigate as legitimate errors any DMI

indications or SNMP traps that are generated.

For more information, refer to

DOCS\README.TXT in the directory in which you installed ISC.

Software

Rebuilding System Software with SYSBUILDER and the System CD

If your system was delivered with a SYSBUILDER diskette, you can use it and the System CD to

rebuild system software. Follow the instructions provided with the System CD to reinstall the

operating system and associated system software. The System CD’s instructions replace the

operating system installation instructions in your system’s documentation.

and trademark law. This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any

derivative work, without written consent from Intergraph Computer Systems.

Use, duplication, or disclosure by the United States Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of the

rights in technical data and computer software clause at DFARS 252.227-7013. Unpublished rights are reserved under the copyright

laws of the United States.

Intergraph Computer Systems, Huntsville AL 35894-0001

Notice

Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer

Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.

Intergraph Computer Systems shall not be liable for incidental or consequential damages resulting from the furnishing or use of this

document.

All warranties given by Intergraph Computer Systems about equipment or software are set forth in your purchase contract. Nothing

stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such

warrantites.

Intergraph InterServe 9400 User manual

Intergraph InterServe 9400 User manual

Intergraph InterServe 9400 User manual

Related papers

Other documents