ATEN KE69 Quick start guide

Category
Rack accessories
Type
Quick start guide

This manual is also suitable for

2. Remove the bottom and side screw from each KE6900 unit.
KE69 Dual Rack Mount Kit - 2X-021G
Installation:
Package Contents:
1. Remove four screws from the KE6900 units and then use the same screws to secure the units
together with the link bracket.
This dual rack mounting kit installs two KE6900 units side
by side in 1U of server rack space.
1 x Link Bracket
1 x Right Mounting Bracket
1 x Left Mounting Bracket
4 x Phillips Head Hex Screws
4 x Flat Screws
User Instructions
KE69 Dual Rack Mount Kit - 2X-021G
4. Screw the mounting brackets to the rack.
3. Use the screws from step 2 to install the left and right mounting brackets.
User Instructions
  • Page 1 1
  • Page 2 2

ATEN KE69 Quick start guide

Category
Rack accessories
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI